 Posted: Sun Oct 18, 2009 12:43 pm Post subject: sony kv2964MT |
|
| Check the television and found that H-out Q802(2SD1941) found short.what are things need to check before replacing the Q802.I checked the parts which are around the LOT and H-out and all seems to be good.Need suggestion. | |
| Posted: Thu Aug 27, 2009 10:11 am Post subject: |
|
| Start by checking the fuses in power supply area: PS601, PS602, PS651 (22V), PS652 (14V), PS653 (7V), PS654 (135V). On the cathode end of the diodes that the last four fuses protect (Reference = ground) you should have the supply voltages inside the brackets.
With "response" LED blinking, I have to assume you have 5V supply (via 14V). Being that set is from late 80's, I presume NO repetitive "pattern" to LED Blinking? |
|
| Posted: Thu Aug 27, 2009 6:55 am Post subject: Sony KV-2964 MT |
|
| I got a sony KV-2964 MT Television receiver.The Set is Dead.When i power on the set gets power but no sound and no picture.But when i press and controls from the front panel the led in the receiver get blinks.Need solution what might be the problem.
With Regards, Ramji M.H. |
|