| Author |
Message |
| wala110 |
 Posted: Fri Sep 04, 2009 9:53 am Post subject: |
|
| ok ill check on that |
|
 |
| jts1957 |
| Posted: Fri Sep 04, 2009 7:30 am Post subject: |
|
Scope the output of the Jungle IC / Input to the Vertical Output IC.  |
|
|
| wala110 |
| Posted: Fri Sep 04, 2009 6:51 am Post subject: |
|
| the voltages are fine the respective input voltages are the same but i noticed that it turns off after a few seconds had passed. |
|
|
| jts1957 |
| Posted: Fri Sep 04, 2009 6:20 am Post subject: |
|
| And the voltages? |
|
|
| wala110 |
| Posted: Fri Sep 04, 2009 6:16 am Post subject: |
|
| sorry i posted as a guest. |
|
|
| Guest |
| Posted: Fri Sep 04, 2009 5:39 am Post subject: |
|
| i replaced the vertical ic but no luck, still the same problem. |
|
|
| jts1957 |
| Posted: Thu Sep 03, 2009 4:41 pm Post subject: |
|
| Try Vertical Output IC and make sure has B-plus voltage's. |
|
|
| wala110 |
| Posted: Thu Sep 03, 2009 8:24 am Post subject: Philips CRT TV 25PT4323/69R problem |
|
i am having problems troubleshooting this tv.
it only displays one long horizontal line at the center of the screen.
i checked the electrolytic capacitors and replaced them but it didn't work.
cam someone help me with this |
|
|