| Author |
Message |
| Guest |
 Posted: Tue Jan 19, 2010 2:46 am Post subject: |
|
| Do you mean the high voltage lead? Still kinda confused? |
|
 |
| minnie |
| Posted: Sat Jan 16, 2010 4:16 am Post subject: |
|
| The other red wires go to a block. You swapped CRT boards now you need to swap the rest. |
|
|
| Guest |
| Posted: Fri Jan 15, 2010 12:01 am Post subject: |
|
I jus took the blue board an left all the wires hooked up that would reach and plugged it it an turned it on an still didnt get any glow from the tube?
"Did you swap leads on the screen/focus block?"
I'm a little vague on what exactly your talking about? |
|
|
| minnie |
| Posted: Thu Jan 14, 2010 11:56 pm Post subject: |
|
| Did you swap leads on the screen/focus block? |
|
|
| Kev90sc |
| Posted: Thu Jan 14, 2010 8:30 pm Post subject: |
|
| Yes I took the board off the blue one that works and there was no change |
|
|
| minnie |
| Posted: Thu Jan 14, 2010 4:21 am Post subject: |
|
| Did you swap the CRT board? |
|
|
| Kev90sc |
| Posted: Wed Jan 13, 2010 5:56 am Post subject: Sony KPR53EX35 Green CRT |
|
Hello, I jus picked up an old Sony Projection TV got it home green CRT dead, red and blue seem to work fine, not getting any filament glow on the green checked easy obvious stuff loose connections broken wires, Any help would be greatly appreciated, as I am a Mechanic not a TV repair guy, but hey you pretty much have to have a degree in Electrical engineering
to work on these new cars! Thanks
:Oh BTW forgot to mention I unplugged the working blue CRT plugged the board into the green with no change.
Kev |
|
|