Author Message
gary
PostPosted: Mon Apr 23, 2007 8:26 am    Post subject:

manual is availble on this site just search for a10
NoTiTo
PostPosted: Fri Apr 20, 2007 7:42 am    Post subject: micro & Service Manual

Yeah thanx I will get the technician to llok at the micro but I need the service manual too as they do not have it.
Anyone know where I can get hold of a copy of the service manual?
No one in South Africa has a copy, not suprising since the TV was bought in Germany...

Rgz,
NoTiTo
Guest
PostPosted: Thu Apr 19, 2007 12:24 pm    Post subject:

just change the micro, it is responsible for 99.9% of faults on that chassis
NoTiTo
PostPosted: Thu Apr 19, 2007 12:18 pm    Post subject: Service Manual for 28PW6305/01

Hi,

I have a similar problem with the TV switching off...
I need a service manual for the phillips 28PW6305/01. Can anyone supply me with a copy or let me know where I can get one?

Regards,
Notito
minnie
PostPosted: Thu Sep 15, 2005 2:07 am    Post subject:

I’d replace the ssb. Small signal brd. Listen to Brian and take down the values. If you need the part # Give us the model #. I know the chassis #, but model is better.
Brian Hoskins
PostPosted: Wed Sep 14, 2005 5:04 pm    Post subject:

This fault is normally due to the painter IC on the SSB panel which can give you some very strange faults indeed, ranging from stuck in standby, no remote control functions, picture problems, switching to AV channel of it's own accord, etc.

Before you change the IC you must enter the service mode and take down all the service data so that it can be re-entered when the new IC is fitted. Pay particular attention to the option codes - these are essential for the set to work properly.

You need to be very good at SMD rework to take on this procedeure.

Brian
gary
PostPosted: Wed Sep 14, 2005 6:20 am    Post subject: a10e

fault is probably the micro on the small signal panel ic7064, enter the service mode check the software version and then order the latest version. this is a very common problem. can be a pain to change as it is a 100 pin surface mount device, read the service sheet that comes with the new ic carefully BEFORE attempting to change as it will save you a lot of time.
minnie
PostPosted: Wed Sep 14, 2005 2:17 am    Post subject:

Micro or flyback.
popeye
PostPosted: Tue Sep 13, 2005 6:52 pm    Post subject: 28pw6305/01 A10e

hi

tv doesn't respond the remote control.
tv sometimes goes out (stan by).

in way service it puts error 13
tuner?
is probably???

thanks
brian.Minie

Powered by phpBB © 2001,2002 phpBB Group