 Posted: Tue Mar 02, 2010 2:05 am Post subject: |
|||
Why isn't marriage considered legalized prostitution?. Menards sells peanuts because they can... Y sustain is probably bad. What your seeing is washed out video. Normally the sustain pulse in on the X but some manufactures change it up. Feel the big heat sink on the X, bet it's cold but the Y is hot. Wouldn't happen to be an LG panel would it? 
|
|||
| Posted: Mon Mar 01, 2010 6:14 am Post subject: |
|
| This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com [email protected] |
|
| Posted: Mon Mar 01, 2010 1:12 am Post subject: |
|
| Why don't any of these posts help me? Just kidding. It is a plasma, not an lcd...so an inverter won't help. I did find out that sometimes you can see something on the screen, but its not a picture...its just a couple of vertical streaks that show up then disappear... Sounds like a bad panel to me? Anyone else? |
|
| Posted: Mon Mar 01, 2010 12:47 am Post subject: |
|
| Why does Menards home improvement center sell 5 pound bags of peanuts? | |
| Posted: Sun Feb 28, 2010 11:40 pm Post subject: |
|
| How does an LCD web site have to do with fixing a plasma? | |
| Posted: Sun Feb 28, 2010 10:00 pm Post subject: Re: Vizio p42hdtv10a Plasma - No Picture, but sound works. |
|
| Go to this website it explains what the issue is and the part number you will need to replace to resolve the issue tracy any question just email me [email protected] http://www.lcdparts.net/AGNlcdtvInverter.aspx?gclid=CKHIl9XqlaACFSNhswodxHwseg |
|
| Posted: Thu Feb 25, 2010 5:42 pm Post subject: Vizio p42hdtv10a Plasma - No Picture, but sound works. |
|
| Tv powers on, LED light turns green and stays green. There is no change on the panel. It stays black. I can hook up an external device and get it on the input for that device and the sound works like it should. I checked the Y and Z Sustain boards, the Z-Sus had a blown fuse. I tried replacing that fuse and nothing changed. I tried replacing that entire board, still no change. All power on the PSU (vs, va, vscan, vset, etc.) is good. What should I try next? Y - Sus or Logic Main? Or something else? |
|