| Author |
Message |
| phillipw |
 Posted: Mon Apr 26, 2010 10:28 am Post subject: Bulged caps on my 42pf5520d/10 plasma tv |
|
| Hi Minnie, no the caps were not bulged, I got the polarity right tho! Have done a bit of electronics study but latest tv faults a bit lean on! I will take the back off again and run it live (being very careful!) and listen to where the double click is coming from. I will also carefully (not live) check all the parts for burning/bulging. Any help would be good, am willing to pay for getting it running again but limited funds! |
|
 |
| minnie |
| Posted: Mon Apr 26, 2010 2:21 am Post subject: |
|
| Were they bulged and did you watch the polarity of the caps? |
|
|
| phillipw |
| Posted: Sun Apr 25, 2010 2:52 pm Post subject: philips 42pf5520d/10 plasma tv no pic no sound? |
|
| I have replaced the 2 caps on the 3.3V line on the powerboard but still no pic or sound? there are 4 clicks when powering on. remote works green light. |
|
|
| minnie |
| Posted: Wed Apr 21, 2010 11:29 pm Post subject: |
|
| Look for the bulged caps on the power supply. They should be 1000uf@16 volts put in 1000uf@25 volts. |
|
|
| hoteldave |
| Posted: Wed Apr 21, 2010 11:04 am Post subject: Phillips 50" Plasma |
|
Hi,
Model 50PFP5532D/05 Phillips Plasma is going into protection mode when switching on. Only 18 months old and had little use. Does anybody know if this a common problem ?? Also any ideas on a reputable company to repair TV in Blackpool area.
Thanks |
|
|