| Author |
Message |
| tib |
 Posted: Sat Dec 10, 2005 5:02 am Post subject: |
|
Thanks Gary for you instant respose! I don't understand what you mean 'diamond button'. Are you refering at remote control or front panel of tv set ? I am using a replaced remote control  Thanks again! |
|
 |
| gary |
| Posted: Fri Dec 09, 2005 5:07 pm Post subject: |
|
| i cant remember ow to set the personal preferences but i think you press the open diamond button then set the col con and vol then press the pp button then the close diamond button. you may need to get a instruction book for it but it will not be a fault just button sequence to store |
|
|
| tib |
| Posted: Fri Dec 09, 2005 3:04 am Post subject: |
|
| Hi! Please help I have PHILIPS 27CS6895 ( not have user manual of it)with same problem, I have replaced the accu but analog settings( vol, bright, colour balance tone ) are still NOT memorised. Only station program memory is fixed. Thanks for sugestions! Tib |
|
|
| 80p18 |
| Posted: Thu Oct 06, 2005 7:14 am Post subject: |
|
| Thank you gary! |
|
|
| gary |
| Posted: Thu Oct 06, 2005 5:52 am Post subject: |
|
| the battery is soldered directly to the board, it is usually white or yellow and either the same size or half the size of a AA battery depending on its voltage, it is recharged by the tv normally and will have to be replaced as it sounds like it has lost its ablilty to hold a charge |
|
|
| Guest |
| Posted: Wed Oct 05, 2005 1:43 pm Post subject: |
|
Thanks gary for your quick response!
Where is this battery located precisely? How can I recharge it? |
|
|
| gary |
| Posted: Wed Oct 05, 2005 1:33 pm Post subject: |
|
| YOUR FAULT IS THE MEMORY BACK UP BATTERY, IT IS A RECHARGEABLE BATTERY SOLDERED DIRECTLY TO THE BOARD, EITHER 1.2V OR 2.4V. |
|
|
| 80p18 |
| Posted: Wed Oct 05, 2005 1:11 pm Post subject: philips 27cs6895 memory loss |
|
| My TV (Philips 27CS6895 08R) loses its memory (color, contrast, volume, programs) after it is switched off. Memory is not lost when TV is set to standby mode, but this happens when I use the power button to shut it down. Can anyone help me to find the way to fix this problem? |
|
|