 Posted: Tue Jan 24, 2012 7:36 pm Post subject: Fluke 6061A, Need Help |
|
| I also have a 6061A that has 3 amplitude ranges which have broken down, and in a search for the service manual I found schematics for the 6060B (equivalent older model) after doing a google search. Here is one such place: 128.238.9.201/~kurt/manuals/manuals/Fluke | |
| Posted: Sun Jun 13, 2010 4:25 pm Post subject: Fluke 6061A, Need Help |
|
| I have a Fluke 6061A that has no RF output at all and I'm looking for some help.
I got it from the place where I work, not working of course. Display works OK, 10 Mhz reference Oscillator works, just no RF output. I removed the output attenuator board (strip) and no output from the RF power strip, nor can I scope any signals along what appears to be the power amplifier strip. I also took my radio (Ham Radio FT100) and used a short lead as a "sniff" for signals, but didn't get any signal on the RF board. I'm just trying to get it working for hobby work, not terribly worried about being calibrated and such. Anyone have any ideas? My guess is that a schematic would be nearly out of the question. Mike |
|