Author Message
PostPosted: Sat Jul 24, 2010 11:37 am    Post subject: View Sonic said trash it,,

I spent 3 hours on the phone, I talked to a supervisor he said the pic of the little heart was a code sign that there is a hardware compatibilty problem, well no return on the new power board, anybody want these parts it's all going to the trash the next garbage day which is 7/29/10, email me I will hold what parts you want till you send a shipping label.

Email : [email protected]

Bad reviews;
PostPosted: Tue Jul 20, 2010 9:13 pm    Post subject: Why should I buy a Inverter ?

An inverter in a large investment should I get one ?

Video of inverter--->

Another view-->
PostPosted: Sat Jul 17, 2010 4:31 pm    Post subject: Yea,,,

Anybody out their have a pic or two of those capacitors/condensers that are on TOP that seem to be a plague on these models ?

Oh NO audio at all on start-up with new power board, could be the upper video cable or the connectors on the inverter may need to be cleaned and reseated, might get lucky or there may be 5 hearts on the screen..
PostPosted: Sat Jul 17, 2010 2:12 am    Post subject:

That's how many "owners" it has shot in the heart. Laughing
PostPosted: Sat Jul 17, 2010 12:42 am    Post subject:

jts1957 wrote:
Backlights, inverter.

What does audio do during this sequence?

Yea inverter was my next move, no the TV picture "flash" was clear backlight looked fine, I guess the unit which is a 2007 model must have been on a non-grounded outlet and good ole power surge whacked the PSU and inverter. Now the new power board has 3 pins the old has 2 (grounded to the chassis), the service manual talks about a "reset" I can't find how to do it, I will check out a new inverter, if I don't get any clues what the 4 & Heart picture means, it's a code for something.
PostPosted: Sat Jul 17, 2010 12:20 am    Post subject:

Backlights, inverter.

What does audio do during this sequence?
PostPosted: Fri Jul 16, 2010 11:22 pm    Post subject: Follow-up ViewSonic N3252w-1M / Bad FSP212-3F01 PSU,,

Just a follow up, was given the unit, initial analysis was when unit powered up just quik picture flash then black /with blinking red and/or green power light. The service manual don't give any troubleshooting info, just got the new PSU today FSP212-3F02 (with adapter cable for 3F01) 60 bucks.


The above FLASH when powered up is what I got, power light stays on, remote control works, any ideas ?

Powered by phpBB © 2001,2002 phpBB Group