Author Message
Naili
PostPosted: Tue Sep 21, 2010 9:27 am    Post subject:

Thanks for taking time to help...
jlmc62
PostPosted: Mon Sep 20, 2010 7:50 am    Post subject: Re: Guest

RE: Guest;
Thank you for providing the link for service manual for the RX700 for free. I was able to download it without any problems.
You may have saved this printer from the junk yard.
Again Thanks.
Guest
PostPosted: Sun Sep 19, 2010 5:49 pm    Post subject:

Parts & Service manual for free Wink
every thing should be free here !
ht**tp://uploading.com/files/b646663f/EPSON%2BStylus%2BPhoto%2BRX700.pdf/
jlmc62
PostPosted: Tue Sep 14, 2010 4:58 am    Post subject: reply

Thanks Justmanuals for the info. I will consider it.
Does anyone know how I can clean the the print head? I had read some where that if you use alcohol or windex that will clean any dried up ink on the print head, but I'm not sure of how to do it. Or is there a way to force cleaning solution into the ink tubing to loosen any dried ink in them??

Thanks
Justmanuals
PostPosted: Mon Sep 13, 2010 5:45 pm    Post subject:

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com


[email protected]
jlmc62
PostPosted: Mon Sep 13, 2010 5:26 pm    Post subject: Epson RX700

I have an Epson RX700 printer that I can't get to print. I have installed a full set of new refillible carts. in it. The ink level shows full carts and the printer does reconize them, but it will not print anything. I have run the head cleaning utility several times, tried printing the nozzle check, word, a picture and still nothing prints. The printer did sit for awhile before I replaced the carts. What other ways can I clean the nozzle heads or the print head to get the printer to print? Is there anyway I can fix the problem?
Any and all help is welcome.
Thanks.

Powered by phpBB © 2001,2002 phpBB Group