Author Message
minnie
PostPosted: Sun Jan 23, 2011 6:03 pm    Post subject:

If you remove the Tcon shield and pull out the right side ribbon cable you'll find pins 79 and 80 are touching. You need to replace the ribbon cable. #60320WF01U

http://www.mcmelectronics.com/product/60320WF01U
Alex12
PostPosted: Sun Jan 23, 2011 9:28 am    Post subject: [b]LCD TV Dynex Model DX-LCD32-09 with the following proble

Hello
I have LCD TV Dynex Model DX-LCD32-09 with the following problem: the screen is white with no picture.
I fixed power supply and got proper voltages, but the problem is still not fixed.
I found on the LCD controller board (T-Con Board) U906 burned and I canít read this IC.
It looks like sot-23 transistor. The element placed on the right side from the AAT1343 - about ½ inch from it. Please, if anybody can help me to recognize the number (marking code) it will be really appreciated. As well, if you have service manual it will be very helpful.
Thank you,
Alex
    [/quote]

    Powered by phpBB © 2001,2002 phpBB Group