| Author |
Message |
| esteban |
 Posted: Fri Mar 09, 2007 2:54 am Post subject: no video issue |
|
Here is the an apparent fix for the no video issue from a tech.
Remove and resolder L14401
tried to include link to the schematic and fix, but got blocked |
|
 |
| minnie |
| Posted: Sat Sep 02, 2006 11:08 pm Post subject: |
|
No video, OSD and Audio fine.
U18101 on PIP module, 3.3 v regulator, #214704
Q26902 on Comb Filter module. Part # 215495
resolder R127 smd on the pip module |
|
|
| Guest |
| Posted: Sat Sep 02, 2006 8:34 am Post subject: Re: RCA CTC203CX - no video (no picture) but has menu and so |
|
| vik wrote: |
RCA TV F32665 has raster and menu appears on screen and works perfectly fine, sound is ok, but NO video (i.e. no picture). Air/cable channels can be switched - sound always comes in, but no picture. Same result when using the video IN (e.g. a DVD source). Obviously a video-path issue.
This appears to be a very common problem for RCA chassis # CTC203CX also ATC113CA1 etc. Found many similar posts on the web/forums, yet no solution.
Please post any specific tips or remedies that you know of. EURAS seems to have the answers, but is paid-only access. Thank you |
"Camatron" hola vik yo tenia el mismo problema y encontre la verdadera solucion y es esta , la señal de broad cast no funciona porque ell comutador de Video no esta trabajando y eso es por la falta de B+ en el circuito esto lleva un regulador de 1.5 amp variable cambialo y tedras la solucion envia a [email protected] si te sirvio de algo. |
|
|
| Guest |
| Posted: Sat Sep 02, 2006 8:28 am Post subject: Re: RCA CTC203CX - no video (no picture) but has menu and so |
|
| vik wrote: |
RCA TV F32665 has raster and menu appears on screen and works perfectly fine, sound is ok, but NO video (i.e. no picture). Air/cable channels can be switched - sound always comes in, but no picture. Same result when using the video IN (e.g. a DVD source). Obviously a video-path issue.
This appears to be a very common problem for RCA chassis # CTC203CX also ATC113CA1 etc. Found many similar posts on the web/forums, yet no solution.
"cambien el regulador de la placa de video input esta no se encuentra
con su voltaje adecuado" como vemos es una pueta de control para las diferentes entradas de video por "Camatron"
Please post any specific tips or remedies that you know of. EURAS seems to have the answers, but is paid-only access. Thank you |
|
|
|
| vik |
| Posted: Fri Nov 25, 2005 1:43 pm Post subject: |
|
| Anonymous wrote: |
| Check vertical IC and change Related caps. fixed this problem last night. on mine. |
Vertical?? - That's not the case here. As I mentioned, the OSD (on screen menu) and raster appear perfectly fine... |
|
|
| Guest |
| Posted: Fri Nov 25, 2005 6:20 am Post subject: |
|
| Check vertical IC and change Related caps. fixed this problem last night. on mine. |
|
|
| vik |
| Posted: Thu Nov 24, 2005 11:07 am Post subject: |
|
| Anonymous wrote: |
| If I'm thinking of the right chasis, check the I/O board and associated panel to panel connections. |
I suspected that too. Forgot to mention that I already eliminated (plugged-out) the I/O board altogether and disconnected the PIP module as well. Still, the problem persisted for the air/cable channels… |
|
|
| stelling5 |
| Posted: Thu Nov 24, 2005 10:42 am Post subject: Re: RCA CTC203CX - no video (no picture) but has menu and so |
|
| pls find the tuner and look the b+ and use tester and calculate the b+ plus of tuner. if there is no output votage look a resistor or fusable risitor and re soldering the b plus of tuner. |
|
|
| Guest |
| Posted: Thu Nov 24, 2005 10:42 am Post subject: |
|
| If I'm thinking of the right chasis, check the I/O board and associated panel to panel connections. |
|
|
| vik |
| Posted: Thu Nov 24, 2005 7:08 am Post subject: RCA CTC203CX - no video (no picture) but has menu and sound |
|
RCA TV F32665 has raster and menu appears on screen and works perfectly fine, sound is ok, but NO video (i.e. no picture). Air/cable channels can be switched - sound always comes in, but no picture. Same result when using the video IN (e.g. a DVD source). Obviously a video-path issue.
This appears to be a very common problem for RCA chassis # CTC203CX also ATC113CA1 etc. Found many similar posts on the web/forums, yet no solution.
Please post any specific tips or remedies that you know of. EURAS seems to have the answers, but is paid-only access. Thank you |
|
|