 Posted: Sun Dec 04, 2005 4:22 am Post subject: ICC17 Thomson blink codes |
|
| Thomson TV Model: (ICC17 Chassis)
Standby led fault codes and meanings list / standby led flashes then pauses Code meanings are as follows: 10 = child lock mode, 11 = timer mode, 14 = there is no response from Iv01, 15 = there is no response from IS40, 20 = bus access prohibited by software, 21 = bus data line held low, 23 = bus clock line held low, 25 = switched 5v supply missing, 26 = crt is not warming in the allotted time, 27 = deflection failure more than three times, 28 = IF01 guard voltage (pin exceeded, 34 = no response from the nvm chip IR03, 36 = incorrect address passed to bus handler, 37 = unexpected level on NMI line (power fail), 41 = bus data line not recoverable |
|
| Posted: Sun Dec 04, 2005 3:09 am Post subject: Thomson icc17 33ms21e dead with blink 2 then 6 |
|
| Hi there.
I have no service manual where I could check what means bilnking 2 then 6 times on my tv set. Could someone help what happened? Regards, -stapa |
|