Author |
Message |
jono |
Posted: Sun Dec 11, 2005 5:33 pm Post subject: Beko NR28426NDS |
|
Many thanks for the info, TV is up and running. jp. |
|
 |
SHELDONS TV |
Posted: Fri Dec 09, 2005 8:19 pm Post subject: |
|
you need to replace the lopt and transistor ,then check the line drive frequency-there is a fault which increases the line frequency and there are certain mods which may need to be carried out.
you should have a working set one the lopt and line transistor has been replaced.Try the wimtv site for mor info if you have more problems |
|
 |
Jono |
Posted: Fri Dec 09, 2005 7:14 pm Post subject: Beko NR28426NDS |
|
Beko 28426NDS i cannot locate this model in any search. My problem is ticking BU508df(LOPTr) and flashover on EHTpiller from LOPTX. Can i be informed of any other associated components that would need replacing. The BU508 has destroyed twice.
many thanks JP Acircuit diagram would be helpfull for this model. |
|
 |