| Author |
Message |
| gost222 |
Posted: Fri Jan 06, 2012 11:59 am Post subject: pc to tv |
|
| can i connect pc with 9 pin s-video connector to saba w81100 tv(scart or rca connectors?) an how can i do this? |
|
 |
| xJoe |
Posted: Tue May 08, 2007 10:18 pm Post subject: |
|
Working solution provided by Gary!
"try pressing simultaneously for 30 secs vol- on set and blue key on remote"
Cross-linking to thread where solution was posted:
http://forum.eserviceinfo.com/viewtopic.php?p=58145[/b] |
|
 |
| malm |
Posted: Mon Sep 18, 2006 11:43 pm Post subject: Fix it? |
|
| do you have fix the problem now? l have same problem, please help |
|
 |
| xJoe |
Posted: Wed Jan 11, 2006 11:27 pm Post subject: Didn't work |
|
| Thank you for trying to help. Unfortunately your advice didn't work. I held "volume down" on the front panel for well over a minute without any effect. |
|
 |
| Guest |
Posted: Sat Jan 07, 2006 9:35 am Post subject: P displayed |
|
| Hold vol down on front panel until it goes away. |
|
 |
| xJoe |
Posted: Tue Jan 03, 2006 3:27 am Post subject: Small P on screen on SABA W81100 TV wont go away |
|
Hi, I've got a SABA W81100 32" Widescreen TV (not 100hz, not flat screen), that is about a year old. The manual has Thomson written on it so it's likely some universal model.
A couple of months ago a small black P on a blue square appeared in the
lower left corner and despite turning every obvious feature on and off, it wont go away. After extensive Googling I belive the TV may have entered some "Programming mode", but I havn't been successful in finding a way to turn it off.
Yes I know it may seem like a small issue but it's been very unsatisfying not to be able to remove it after spending som much time on it.
Any help to remove this 'P' will be greatly appreciated! |
|
 |