Electronic equipment repair and service manual search discussion :: Topic review

Kaczus · Posted: Sun Mar 29, 2015 9:12 pm Post subject:

So I ordered a new lasers can also be damaged? Strange little because they all have the same behavior. He move eye (lens?) but.. llack of light

jts1957 · Posted: Mon Feb 09, 2015 7:20 pm Post subject:

ALL "new" assemblies I've ever received from my suppliers have arrived with a shorting 'clip' or pads connected by a dab of solder. These need to be removed upon installation for the unit to work.

IF you received one with NO shorting 'clip' or dab of solder, then one would question the working condition of the supposed "new" assembly. Crying or Very sad

Kaczus · Posted: Mon Feb 09, 2015 5:31 pm Post subject:

Kaczus · Posted: Sat Nov 08, 2014 12:49 pm Post subject:

Kaczus · Posted: Wed Sep 10, 2014 2:07 pm Post subject:

hallo ??

Kaczus · Posted: Sat Aug 30, 2014 5:04 am Post subject:

No one help??

Kaczus · Posted: Sun Aug 24, 2014 10:48 am Post subject:

Both new lasers that I bought did not solder a static point - photo.

My laser -> http://www.aliexpress.com/item/Sony-KSS-662-KSS-660-6-DISC-CD-optical-pick-up-KSS662-laser-lens-for-car/1191622869.html

On the tape I dont solder, only replaced the laser but it still does not light (no light), but the lens pulse.. it seems to was damaged in electronics changer?? - where to look?

jts1957 · Posted: Sat Aug 23, 2014 3:08 pm Post subject:

Some short the pads, some use metal clips across end of flex wire (or plugged into a socket).

http://www.aliexpress.com/store/product/VAM12-4-mech-CDM-12-4-CDM12-4-VCD-Laser-Lens-Pickups/521732_885948320.html

http://img.alibaba.com/img/pb/413/731/895/895731413_102.jpg

Kaczus · Posted: Sat Aug 23, 2014 7:32 am Post subject:

It's about removing the solder with a laser? He was not in the two lasers as soon as I opened the package?

jts1957 · Posted: Wed Aug 20, 2014 8:37 pm Post subject:

You DID remove the shipping shorting strip after installation?