 Posted: Thu Sep 13, 2012 10:48 pm Post subject: |
|
| Usually when this happens you may blow the audio output chip, or some protective diode, since the display is OK I would suspect the audio output ic.
Sometimes you can see tell tale burn marks on the chip or even smell the burn. Dave |
|
| Posted: Sun Sep 09, 2012 9:34 pm Post subject: 12v into 6v radio mains feed |
|
| hi plugged a 12 v dc into my radio it buzzed then i disconnected it
now digital display works but i have no volume/sound on set what have i damaged and could it be repaired it is a sangean ats 404.............. thanks chicco..........  |
|