 Posted: Mon Oct 22, 2012 12:13 am Post subject: power supply fault |
|
Have you checked the bridge rectifier plus the opto coupler if this has died then you will not see any main DC supply voltages if the Bridge has gone short it will take out your fuse if its open you will nor get dc supply for opto coupler plus standby voltages  |
|
| Posted: Mon Oct 08, 2012 6:31 pm Post subject: Yacumo 32 not working |
|
| My 2005 LCD Yacumo 32 inch TV just stopped working as well. I havn't gone into the back of it, is it reparable? Is it worth sending it for repair. Did you get yours working?
Thanks Ben |
|
| Posted: Mon Sep 24, 2012 7:20 pm Post subject: Yakumo 32'' powersuply broken |
|
| Hi everyone , I have FSP212-3F01 board and i replace Q2 and Q2 transistor and all caps . Now I have problem , when i put board in, then connect all cable when i turn on power, no light flash , its seems like no power then I took of the board again and look for 5v, 12v, 24v i didint find in cns1 and cns2 any power. Can someone help my ?
Fuse is oky. Before this problem ,when I replace all caps , my fuse was keep blowing , then i found that Q2 and Q1 vas dead , when I change fuse was oky , but s TV not working ... Hellp Sorry for my English speling |
|