 Posted: Wed Jan 09, 2013 6:02 pm Post subject: Hameg 303 |
|
| thanks vtech for your help, one thing I did nit mention was that the overscan leds in both directions are constantly lit? | |
| Posted: Wed Jan 09, 2013 1:45 am Post subject: |
|
| Based on your description, it may be a number of things, first the vertical amplifier but how do you know the horizontal is working(despite having a horizontal line). There may be an issue on the very front end that the actual signal may not be getting to the amplifiers & &....
So, in this case, the best place to start is to get a diagram and start by checking all your supply lines first(especially the lower ones) and make sure they make it to their destination. There is a service manual in our database and there is one at Elektrotanya.com |
|
| Posted: Tue Jan 08, 2013 7:15 pm Post subject: Hameg 303 30Mhz dual trace ociloscope |
|
| Hi
Can anyone help me with a problem with the Hameg 303 , I have a horizontal trace but no vertical response on ether inputs with an applied signal , have carried out a visual and have not found any thing obvious. |
|