Digitrex JTF-3227 32" LCD TV / Haider PSU

bdtprez · Joined: 26 Aug 2008 Posts: 2

I have a Digitrex JTF3227P 32" LCD HD TV with a bad power supply. There are several components that were physically destroyed in the PSU by a "surge": IC302 R323 D302 and R330. The PSU is manufactured by "HAIDER" and is model # HDAD200W301 rev 4.3. Does anyone have a schematic or can tell me the values of the missing components? "Digitrex" appears to be out of business, although they still have a website, the phone # is disconnected. I have been unable to locate the PSU manufactuer as well. Any help would be greatly appreciated!

jts1957 · Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away

I Have same unit. If you still have & proves unfixable, my (customer) unit needs board with VGA (PC input), HDMI and Component Input jacks (someone's attacked some parts with a soldering iron - certain OSD messed up/won't adjust and no/bad video, both vary with source chosen. The info within quotes is nomenclature off of part in question.
IC302 top line: "3843B," bottom line: LOGO="ST" then "Z524."
R323 "201" (R453=same).
D302 "A2" (D401 thru D404=same).
R330 "1001" (R419 & R458=same).

Guest · Posted: Thu Apr 02, 2009 3:43 pm Post subject: help please

I saw your other post where you used two universal power suppllies. my question is on connector 2, pin 4 "stb" what did you hook that to? the 5V or the ground?
thanks. any other help you can give me would be greatly appreciated. I have some electrical knowledge, but it is mainly in automotive. but I don't recognize the tv's icon's or lablel's. this is the same tv you have. jtf3227p
thanks.