View previous topic :: View next topic |
Author |
Message |
SimonP Guest
|
Posted: Wed Sep 28, 2005 1:53 pm Post subject: Wharfedale 890 - PT92 Chassis |
|
|
I have one of these sets, which is not responding to AV control signals:
Firstly, it does not enter AV mode with Scart Pin 8 switching voltage.
Therefore it will not switch normal/widescreen with 6/12V on this pin.
The AV switching voltage has been followed through to pin 8 of the micro and is correct allowing for the potential divider RE11/RE12.
(Sky box widescreen control format)
Secondly, it does not respond to "picture line 23" embedded picture format control signal. (Freeview DTT widescreen control format)
Is there a sneaky service menu option to enable/disable these functions, have they just not been designed in, or have I got a faulty Micro?? |
|
Back to top |
|
|
Faulty Man Guest
|
Posted: Thu Dec 29, 2005 1:04 am Post subject: Scart Switching |
|
|
My PT92 doesn't switch to AV either (very annoying). It does switch to RGB when I tell my Sky box to send RGB but I also don't get auto 4:3/16:9 switching. I would assume it wouldn't be disabled but I've never been able to get into the service menu to see.
Found your question while searchnig for a power fault on my PT92. No EHT with a high pitch chirp about every second. Any ideas?? Also if you hear of how to get into the service menu, let me know. Before it packed in (christmas eve, believe it or not) I was trying to find out how to get into the service menu to correct the 2cm shift to the left when I use RGB. Sky digital unlike most DTT boxes don't have an RGB centering option in the system setup. |
|
Back to top |
|
|
Faulty Man Guest
|
Posted: Thu Dec 29, 2005 1:06 am Post subject: Scart Switching |
|
|
My PT92 doesn't switch to AV either (very annoying). It does switch to RGB when I tell my Sky box to send RGB but I also don't get auto 4:3/16:9 switching. I would assume it wouldn't be disabled but I've never been able to get into the service menu to see.
Found your question while searchnig for a power fault on my PT92. No EHT with a high pitch chirp about every second. Any ideas?? Also if you hear of how to get into the service menu, let me know. Before it packed in (christmas eve, believe it or not) I was trying to find out how to get into the service menu to correct the 2cm shift to the left when I use RGB. Sky digital unlike most DTT boxes don't have an RGB centering option in the system setup. |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
DCR-TRV410_X SONY • service.zip R8 FOSTEX • FDS6679AZ - P-Channel PowerTrench MOSFET • [pencap radial] TH Series Teapo • UREI-1181 . Various • MAIN B Rolsen • SCHNEIDER • FM AM Stereo-clipper 3312 Nordmende • info Samsung • 4010 SGS •
|