PHILIPS TELEVISIONS LED AND MODEL NUMBERS

[MARI]

HI ALL
THIS IS INPORTANT WHEN POSTING FAULTS FOR PHILIPS TELEVISIONS,ALWAY POST THE MODEL NUMBER AND THE CHASSIS TYPE WHICH CAN BE FOUND ON THE SAME LABEL ON THE BACK OF THE CABINET,THE CHASSIS TYPE IS THE NUMBER ENGINEERS WANT AND WILL BE LISTED IN THE BOTTOM CORNER OF THE LABLE,MAYBE 10E,LO1.1 OR LO2.2 ECT,IT WILL BE THERE SO LOOK FOR IT.ALSO LETS GET TO THE LED FLASHING AND WHAT IT MEANS,IF THE LED,THE LITTLE LIGHT ON THE FRONT THAT SHOWS POWER ON FLASHS IN A CERTAIN WAY,SAY 3 BLINKS AND THEN 2 BLINKS IT IS INDICATING A FAULT CODE,SO THE ABOVE WOULD BE FAULT CODE 25,THIS MAY MEAN OVERVOLAGE PROTECTION OR FRAME FAULT,SO TAKE NOTE AND LOOK AND THEN POST THE FLASH NUMBER WITH YOUR MODEL NUMBER AND CHASSIS NUMBER,ITS HELPS THE LIKES OF US ENGINEERS AND HOPEFULLY WE CAN ANSWER YOUR QUESTIONS,REGARDS MARIO

[Guest]

Thanks Mario,
Okay my model number is 27PT6441/37 Chassis number LO4, 1U AA. And it blinks 3 blinks, then 2 then one long one. Thanks so much. And when I do turn on the tv it will stay on for about 3-4 seconds you can hear sound and then it just shuts off after 3-4 seconds. Thanks

[MARI]

hi there,thanks for your question,unfortunatly im away working at the moment but i will chase this fault up for you and post reply back,regards Mario

[Guest]

Thanks Mario,

I appreciate! I will wait for ya no problem! thank you so much!