electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
display picture
Goto page Previous  1, 2, 3, 4, 5  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
The_AntiRAM
Guest





PostPosted: Fri Nov 27, 2009 8:57 pm    Post subject: Reply with quote

Forget for now the logic board.
-------


I looked again to the "photographic service" made by you.


You have most likely a defective Y-SUS BOARD and the two Y-BUFFERS

TRY FIRST to find those and replace Y-BUFFERS AND Y-SUS. ('Cool')
(The Y-SUS Is gone because of the buffers fault!)


DO NOT replace ONLY the Y-SUS board alone or you will kill it due to
the defective buffers. ('Crying or Very sad')


CHEERS.
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Fri Nov 27, 2009 9:00 pm    Post subject: Reply with quote

See a number of missing parts in photos of your last post ... so I'd say no, they are not fully compatible. Sad
_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
The_AntiRAM
Guest





PostPosted: Fri Nov 27, 2009 9:12 pm    Post subject: Reply with quote

OH by the way

I gave just now a look around

these parts are common even on PHILIPS TV with same panel equipped.

You can find now all spare parts on ebay for very low price ('Smile')


(ask sellers all what you need before bidding or buying anything) ('Cool')


CHEERS.
Back to top
vaio



Joined: 05 Nov 2009
Posts: 24

PostPosted: Fri Nov 27, 2009 11:53 pm    Post subject: Reply with quote

OK The_AntiRAM, then next is target :
I am so happy for your help ..... this mean a lot to me . Smile

Y-Board LJ92-01200A
Y-Buffer LJ41-02760A (UP)
LJ41-02761A (DOWN)

I must try to found on ebay.de , because I am in europe.

Thanks jts1957 , I agree with you , (Before I was ask - I was thinking " not fully , but maybe will work..." Smile )

But nevermind, I will do like The_AntiRAM say !
Back to top
View user's profile Send private message
The_AntiRAM
Guest





PostPosted: Sat Nov 28, 2009 3:13 pm    Post subject: REPAIR PLASMA TELLIE. Reply with quote

In Deutschland findest Du alles, was du benötig.

In Germany you will find all what you need.

('Very Happy')


Remember that are common parts between PHILIPS AND SAMSUNG
because of the type of panel.

And anyway this failure is a very common fault even in PHILIPS & SAMSUNG.

Cheers.
Back to top
vaio



Joined: 05 Nov 2009
Posts: 24

PostPosted: Sat Nov 28, 2009 5:18 pm    Post subject: Reply with quote

YES my friend Smile
My TV:
Fujitsu Siemens computers
MYRICA P42-2H
S26361-K1065-V170
REV.02
Made in GERMNANY

Is made and sale for Germany , when I was call USA Fujitsu they say - this is none USA model , this is model for Germany , please call Fujitsu Europe.
I hope that parts will not be so expensive .
Thanks VERY MUCH FOR YOUR HELP , I will report when problem be resolved.
My mail is: [email protected]
Best wishes ...
Back to top
View user's profile Send private message
The_AntiRAM
Guest





PostPosted: Sat Nov 28, 2009 7:37 pm    Post subject: Reply with quote

Of course they are made for German Market.


But the technology is the same , even a USA car has ever 4 wheels ('Laughing')


Price for SUS BOARDS, like yours, are around 75 EUR // 120 EUR
(Used or refurbished parts)


Prices for BUFFERS Y-TOP and Y-DOWN are around 45 / 75 EUR

(Used or refurbished parts)


You can use those parts (USED) freely because they are commonly from
plasma with cracked/broken/dropped/smashed panels therefore they come from functional diplays.

Anyway ask EVER the seller all what you need before buying.

Cheers.
Back to top
The_AntiRAM
Guest





PostPosted: Sat Nov 28, 2009 7:43 pm    Post subject: Reply with quote

There is one Y-SUS on ebay deutchland

the Artikel Nummer ist:320454517044

First You should match the Code of the panel fitted in your plasma
(V3 V4 or V5)

This aforementioned is for V4
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Sat Nov 28, 2009 8:09 pm    Post subject: Reply with quote

Fred Flintstone only uses two wheels.

_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
vaio



Joined: 05 Nov 2009
Posts: 24

PostPosted: Sat Nov 28, 2009 8:40 pm    Post subject: Reply with quote

How will I know what is code (V3 V4 or V5) of my panel ?
This is sticker fit on my panel .


How I will to know which Y-SUS is which code (V3, V4 or V5) , and which is for my panel , is it mark on board LJ92-01200A pba rev. AA5 enough ?
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page Previous  1, 2, 3, 4, 5  Next
Page 4 of 5

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия