View previous topic :: View next topic |
Author |
Message |
Electron
Joined: 24 Oct 2005 Posts: 3
|
Posted: Mon Oct 24, 2005 12:10 pm Post subject: Mitac LC-552 LCD Monitor |
|
|
Hi,
newbie to the forum - was wondering if anyone would have a schematic to a Mitac LC552 lcd monitor. The unit powers up with led flashing between green and amber. I suspect it to be a power supply problem but am unsure without a schematic. Anyone able to help - would appreciate any pointers or even better the schematic.
Fanx in advance
e |
|
Back to top |
|
|
crazytim77 Guest
|
Posted: Mon Nov 07, 2005 8:47 am Post subject: monitor |
|
|
got the same model, same problem.
just wondering if it needs a driver installed since i striped down the monitor and could see no obvious faults. still looking for a driver... |
|
Back to top |
|
|
Kenzo Guest
|
Posted: Tue Jan 17, 2006 7:11 pm Post subject: Mitac LC-552 LCD Monitor |
|
|
I have the same problem with this monitor
it seems to on but the screen is dark
maybe the psu ?
or driver, but I don't understand what
driver do ?
can you help me please ?
Kenzo
[email protected] |
|
Back to top |
|
|
MelF Guest
|
Posted: Thu Jan 19, 2006 6:56 am Post subject: |
|
|
Another dead one here. In case it helps, mine has C3 duff on inverter board (.22uF 160V unknown type, grey rectangular, epoxy encapsulated) bulging + reads as 1KOhm at low voltage, (C4 is identical capacitor and OK). Fuse F1 open also (middle of inverter board, next to connector).
Not exactly a professional (+ got dirt cheap from car boot sale), so I'm just going to replace those 2 components and hope.
Anyone with a schematic or parts list for the inverter board would be a great help. Inverter itself is a Delta DAC-12B058.
Good luck
Mel F |
|
Back to top |
|
|
laptopdoc
Joined: 30 Jun 2006 Posts: 3
|
Posted: Fri Jun 30, 2006 8:33 am Post subject: |
|
|
yep can occur if you open the screen to wide,,small poor built jumper plug creates bad connection causing power drain also screen is mega black ,basically it design fault ,wire is to short,or perfect if you want to sell more units,,if you catch it before any real damage has been done you can splay the pins to make greater contact ,hey presto just saved a few quid |
|
Back to top |
|
|
TAMTEC Guest
|
Posted: Wed Dec 02, 2009 6:32 pm Post subject: Re: Mitac LC-552 LCD Monitor |
|
|
[quote="Electron"]Hi,
newbie to the forum - was wondering if anyone would have a schematic to a Mitac LC552 lcd monitor. The unit powers up with led flashing between green and amber. I suspect it to be a power supply problem but am unsure without a schematic. Anyone able to help - would appreciate any pointers or even better the schematic.
Fanx in advance
e[/quote
just fixed this for my customer. the problem was exactly as per desc above. i tried with the original power supply but the supply and it did not work i then tried with psu from wearness global .co.ltd model number wdso50120 12vlts . It worked no problem . |
|
Back to top |
|
|
|
|