electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Command codes Relisys plasma

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
Willem



Joined: 08 Oct 2004
Posts: 1
Location: the Netherlands

PostPosted: Sun Jan 10, 2010 9:47 pm    Post subject: Command codes Relisys plasma Reply with quote

I have a Relisys plasma 42", type RP42AB20(S)
It had very dark picture so I replaced the Z sustain board.
After that it worked again.
The problem I have now is that the remote control is not working.
I checked the hardware, followed the signal to the processor, and that is ok. This set has a serial RS232 connector.
With the terminal program Docklight I can communicate with the set.
This plasma is about the same as a philips BDS4241.
In the philips manual there is a command to switch the remote off and on.
When I try this the set does not reply with ACK.
The serial commands however are different so it seems.
Does anyone has the correct serial command code for this plasma.

willem
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия