View previous topic :: View next topic |
Author |
Message |
v.kalandra
Joined: 09 Mar 2009 Posts: 3 Location: Czech
|
Posted: Sat Feb 06, 2010 7:07 pm Post subject: VW BETA 4 (Grundig) 14/1995 - I dont know how write a code.. |
|
|
Hi, I give a code form this site...But I have a small problem.
When I power on the radio, radio write "SAFE" and I can not write a code...
Is it the End of the Radio?? When I power the radio and hold some button, Radio will write a some code of CPU. Can anyone help me with code procedure to unlock?? Thanks |
|
Back to top |
|
|
iron eagle Guest
|
Posted: Wed Feb 10, 2010 9:16 pm Post subject: |
|
|
On unit. The display shows "SAFE".
• The TP and TA simultaneously pressing buttons until the digital display "1000" appears.
Buttons let go! TP and TA pressing buttons again, or not hold, otherwise the number is taken 1000 as the code!
Using keys to enter the station 1 to 4 code number. It is with button 1, the first digit of the code number entered, etc., with the second digit key 2
Then again, the TP and TA simultaneously pressing buttons until the frequency display "SAFE" appears. Buttons let go!
Shortly thereafter, will automatically receive one frequency. The unit is now operational.
Is inadvertently entered during the electronic lock picked the wrong code number, the display will show "SAFE", first flashing and then continuously.
Now the entire process can be repeated once. The number of attempts is displayed. If an incorrect code re-posted his number,
the device is locked for about 1 hours, that is, it can not be put into operation. Be turned on after the expiry of one hour, the device retention and
Stuck key in the ignition turns off the display of the experiments and the electronic lock can be lifted. The cycle - two attempts, one hour
locked - still applies. |
|
Back to top |
|
|
v.kalandra
Joined: 09 Mar 2009 Posts: 3 Location: Czech
|
Posted: Thu Feb 11, 2010 6:15 am Post subject: |
|
|
Hey, its allright
And can you tell me a procedure on Grundig WKC5100 RDS?
I thing, is it number 4 and > to login code. But I have invalid code, or i dont know how it is save the code... |
|
Back to top |
|
|
Iron Eagle
Joined: 10 Feb 2010 Posts: 1
|
|
Back to top |
|
|
v.kalandra
Joined: 09 Mar 2009 Posts: 3 Location: Czech
|
Posted: Fri Feb 12, 2010 8:57 am Post subject: |
|
|
I thing...i have a bad code.... I try it in other topic |
|
Back to top |
|
|
|
|