| View previous topic :: View next topic |
| Author |
Message |
dbbogdanovic
Joined: 12 Mar 2010
Posts: 1
|
 Posted: Sat Mar 13, 2010 12:01 am Post subject: acer lcd monitor "al1916wAS" problem |
 |
|
i have this lcd monitor. monitor is dead, no stand by.
and i need a service manual for this model.
please help me.
thank you |
|
| Back to top |
|
 |
Justmanuals
Joined: 21 Aug 2004
Posts: 1949
|
|
| Back to top |
|
|
jts1957
Joined: 24 Nov 2008
Posts: 2474
Location: Far, Far Away
|
|
| Back to top |
|
|
Guest
|
| Posted: Wed Mar 17, 2010 4:32 pm Post subject: |
|
|
I have one of these monitors and it had several capacitors blown in the power supply circuit. Replacing them all repaired my set.
Re-search in google, tells me this is a common problem, and when the caps go they sometimes take out the F200 fuse on the back of the circuit card as well as the power mosfets for the invertor. |
|
| Back to top |
|
|
minnie-me
Joined: 15 Oct 2008
Posts: 17
Location: Mississauga
|
| Posted: Thu Mar 25, 2010 4:48 pm Post subject: I had a similar problem |
|
|
| If the caps and supply are fine....check the voltage at the power on button. It should be around 3.3 volts. Goes to gnd when pressed. If the open switch voltage is way below this, check the 3.3 volt regulator on the input board...should be 3.3 volts when the unit is plugged in. If not, change it. |
|
| Back to top |
|
|
|
|
|
FAQ
