electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
PS-50Q96HD samsung picture fault ( picture attached )

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
joey-dude



Joined: 04 Aug 2009
Posts: 14
Location: uk

PostPosted: Sat May 29, 2010 4:39 pm    Post subject: PS-50Q96HD samsung picture fault ( picture attached ) Reply with quote

i got a PS-50Q96HD samsung set suffers from a green / yellow / red dotted picture ?
orignal fault was: there was no picture when i got set i noticed top left buffer board had blown so i took out top buffer
and also tryed a diffrent bottom buffer board.

( dont have a top buffer avalible yet hence black at top part of picture ) i also tryed another bottom buffer but same problem.

i have tryed a replacment y-sus board & also a diffent control board & also changed the main av board.
i have attached a picture of the fault.



its got my puzzled anyone have any ideas what fault might be with bottom part or picture?.


Last edited by joey-dude on Mon May 31, 2010 12:49 am; edited 2 times in total
Back to top
View user's profile Send private message
joey-dude



Joined: 04 Aug 2009
Posts: 14
Location: uk

PostPosted: Sun May 30, 2010 2:57 pm    Post subject: Reply with quote

does anyone have any ideas? Crying or Very sad
Back to top
View user's profile Send private message
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Tue Jun 01, 2010 9:38 pm    Post subject: Reply with quote

Does the Y sustain have an upper and lower drive board?
Back to top
View user's profile Send private message Send e-mail
jjcool



Joined: 04 Aug 2008
Posts: 7
Location: uk

PostPosted: Tue Jun 01, 2010 11:39 pm    Post subject: Reply with quote

yes it does has a upper & lower drive board attached to the y-sustain board i tryed a diffrent lower drive board but it still had no picture?
Back to top
View user's profile Send private message
joey-dude



Joined: 04 Aug 2009
Posts: 14
Location: uk

PostPosted: Wed Jun 02, 2010 1:26 am    Post subject: Reply with quote

hi minnie, john ( jjcool ) bought over another buffer board which he had spare to try but it still the same Crying or Very sad

would it help minnie if i took a little video showing you fault in action ?

as its got us stumped.
Back to top
View user's profile Send private message
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Thu Jun 03, 2010 4:29 am    Post subject: Reply with quote

The chance of having a bad upper and lower drive board is slim to none unless the panel is bad.
Back to top
View user's profile Send private message Send e-mail
joey-dude



Joined: 04 Aug 2009
Posts: 14
Location: uk

PostPosted: Thu Jun 03, 2010 11:36 am    Post subject: Reply with quote

hi minnie i have made a video to show you fault better

http://www.youtube.com/watch?v=AKus6DnrorA

theres no colored vertical lines i can see when set comes on so i thought pdp maybe ok?

however what are the symptoms of a faulty pdp?

i have a q97hd & also a c96hd samsung both have these same symptoms ?

as i can only fit 1 buffer as i do not have a top buffer untill i can get hold of one i have noticed the 3 ceramic resistors on the y-sustain are getting red hot?
Back to top
View user's profile Send private message
joey-dude



Joined: 04 Aug 2009
Posts: 14
Location: uk

PostPosted: Thu Jun 03, 2010 12:47 pm    Post subject: Reply with quote

one thing i forgot to say in my last post above was i also notice when i power the set on, is the white ceramic block resistors on the y-sustain are getting red hot?

Back to top
View user's profile Send private message
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Thu Jun 03, 2010 8:37 pm    Post subject: Reply with quote

Bad driver or PDP.
Back to top
View user's profile Send private message Send e-mail
Guest






PostPosted: Tue Jul 20, 2010 7:06 pm    Post subject: Reply with quote

Hi there i can repair your faulty Y-Buffer top but i need to see damaged ic how bad it is as some tracks can be burnt underneath ic. my email is [email protected]
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия