electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
37" Magnavox LCD
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
kecwc21



Joined: 05 Jan 2010
Posts: 1

PostPosted: Tue Jan 05, 2010 1:08 am    Post subject: 37" Magnavox LCD Reply with quote

Model 37MF321D/37 TV with power board 715T2056-1 issues. Capacitor at position 2074 (overheated and self vented) has been replaced with match. Diode at position 6079 (was literally baked onto the board) removed solder. When I tried to replace with new diode, part of Cu track on back of board flaked off. Main question being: Can I jump to later circuit, or can board be replaced with board from different manufacturer with same connections?
_________________
kecwc21
WI
Back to top
View user's profile Send private message
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Wed Jan 06, 2010 12:19 am    Post subject: Reply with quote

Follow the trace wire to the next component and jump it.
Back to top
View user's profile Send private message Send e-mail
marcelfadel
Guest





PostPosted: Sat Jan 23, 2010 11:18 pm    Post subject: cracked screen for magnavox tv 37mf321d/37 Reply with quote

hi i was wondering if u have a non working tv with good screen ,or if u know some one or were to get one ,i have a tv with a cracked screen thank u ,,,my email is [email protected] and my phone number 301-697-9444 thanks
Back to top
Dan the Tv man
Guest





PostPosted: Mon Jan 25, 2010 7:10 pm    Post subject: 37 inch Mag Lcd Reply with quote

I may be able to find you one .I have to check I worked on one and the power supply and main board were shot.but the screen was good.Ill check.
Back to top
schafer
Guest





PostPosted: Wed Jan 27, 2010 5:47 pm    Post subject: Re: 37" Magnavox LCD Reply with quote

kecwc21 wrote:
Model 37MF321D/37 TV with power board 715T2056-1 issues. Capacitor at position 2074 (overheated and self vented) has been replaced with match. Diode at position 6079 (was literally baked onto the board) removed solder. When I tried to replace with new diode, part of Cu track on back of board flaked off. Main question being: Can I jump to later circuit, or can board be replaced with board from different manufacturer with same connections?


Do you know the part number of that diode or maybe just the values?
Back to top
neilecker
Guest





PostPosted: Tue Aug 24, 2010 6:19 am    Post subject: Ever Get it fixed?MAGNAVOX 37MF231D/37 Reply with quote

I had have exactly the same problem 2074 was cooked and the diod is baked on the board. I have not taken it off the diod yet I am looking for values for the diod at 6079
Back to top
S8ER01Z
Guest





PostPosted: Tue Sep 14, 2010 2:27 pm    Post subject: Reply with quote

Same issue here...replaced 2074 and diode at 6079 but 3045 appears to be damaged.

Anyone know what should be there? It appears melted and I can't read it anymore.
Back to top
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Thu Sep 16, 2010 4:30 pm    Post subject: Reply with quote

9.1v zener diode 6079 part # 933117780133
Back to top
View user's profile Send private message Send e-mail
Guest






PostPosted: Wed Nov 17, 2010 4:59 am    Post subject: Reply with quote

S8ER01Z wrote:
Same issue here...replaced 2074 and diode at 6079 but 3045 appears to be damaged.

Anyone know what should be there? It appears melted and I can't read it anymore.


I too am looking for 6079 and 3045. I see the post above identified 6079, but does anyone have a clue about 3045?
Back to top
Jakeklem



Joined: 17 Nov 2010
Posts: 4

PostPosted: Thu Nov 18, 2010 12:59 am    Post subject: Reply with quote

S8ER01Z wrote:
Same issue here...replaced 2074 and diode at 6079 but 3045 appears to be damaged.

Anyone know what should be there? It appears melted and I can't read it anymore.


I'm interested in this information too. What is the replacement part we need for 3045? Also, thanks for the 6079 part number. Hopefully I can have this thing up and running again soon.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия