Microwave Combi-Oven Repair

Guest · Posted: Sun Dec 05, 2010 11:45 pm Post subject: Microwave Combi-Oven Repair

I'm entirely new to domestic appliance repair, and I'd like to start with learning to repair this broken microwave sat in my room which my mom threw out. It's a 900W combi-oven, and all of it (the display, buttons, interior light, plate motor, and oven function) works, except for the microwave function.

So with that in mind I suspect the magnetron, or a fuse connected to the magnetron. If it were a cheap microwave it'd make more sense to just get another one, but these combi-ovens fetch a decent price. Plus, where's the sense in reduce, re-use, recycle, if I'm just gonna throw things out? Wink

Can you guys help me out in terms of what I should be looking for? I don't really want to power it up and listen for a humming noise, or try to heat water in there unless you feel that is necessary to troubleshoot it, as last time it was used the microwave function just wouldn't work - I don't think I'd find anything suprising there.

Also, are there any hazards I should observe other than forgetting to discharge the capacitors and running the microwave with the door/case open?

Thanks in advance Smile

The_AntiRAM · Guest

Guest · Posted: Fri Dec 10, 2010 9:47 am Post subject:

You response to "are there any further hazards aside from X and Y?" was "YES THEY ARE". Infact, you haven't answered any of my questions for that matter. I presume therefore that you know nothing of how to answer my questions and instead encourage people like myself not to ask them. So I shall ignore you sir, and await somebody who can talk with experience on the matter. Good day.

Guest · Posted: Fri Dec 10, 2010 9:57 am Post subject:

I'm half way through studying A2 electronics. Aside from computers, phones, video consoles and the likes I haven't any experience with high power appliances such as this. Therefore it would make sense to ask people who are informed. "Professionals" as you call them had to learn from some other guy initially. Some of them learn the hard way; by wiring a kettle up wrong and being thrown across the room Razz

But I'd like to avoid such unpleasantness by taking answers to my questions.

Guest · Posted: Sat Dec 11, 2010 10:59 am Post subject:

The microwave I've got costs £75, compared to a new magnetron which costs about £50... really is a chinese waste world now Razz

Anyhow, I want the experience of fixing these, as I live on a student budget. It turns out it could be a variety of things causing the issue and I'll have to power it up again sometime to find out. In the mean time, I'll try testing the HV diodes and caps, door switches, fuses and magnetron. Then I'll check solder points. This microwave will LIVE (cook food) AGAIN! Razz

jts1957 · Joined: 24 Nov 2008 Posts: 2474 Location: Far, Far Away

Stick a fork in it and see if it's done.
_________________
You're over there, I'm over here.