electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
vestel 11ak30 standby problem

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
mahmoudesm
Guest





PostPosted: Fri Jan 07, 2011 8:55 pm    Post subject: vestel 11ak30 standby problem Reply with quote

i have vestel tv chasis 11ak30 ,it has processor st92195c3b1,and stv2246h .The problem is Standby state.power led is red .Bu808 is ok ,6n80 power suply mosfet is ok.i replaced st92195 .when i open pin 47 of syscon IC TV turn on what are other possibilties.... any one to guide me .thanks in advance.
Back to top
Guest






PostPosted: Sat Jan 08, 2011 4:44 pm    Post subject: Reply with quote

Does the LED stay solid red when you attempt to turn it on, or does it start flickering?

Try:

Check D800 - BA159 for short circuit
Replace D806 (it may read ok)
Back to top
Guest






PostPosted: Sat Jan 08, 2011 4:51 pm    Post subject: Reply with quote

Oh, and eeprom 24C08 may be the problem. Might need reprogramming or replacing.
Back to top
mahmoudesm



Joined: 08 Jan 2011
Posts: 2

PostPosted: Sun Jan 09, 2011 7:32 am    Post subject: Reply with quote

hi,thanks,i try chek it and go back,
yes led is flickering and i hear a sound like that chik..chik .chik!
Back to top
View user's profile Send private message
Guest






PostPosted: Sun Jan 09, 2011 4:41 pm    Post subject: Reply with quote

Another thing to check on 12V line is:

D810 (UF5402) in the PSU might be short-circuit.
Back to top
mahmoudesm



Joined: 08 Jan 2011
Posts: 2

PostPosted: Sun Jan 09, 2011 7:05 pm    Post subject: Reply with quote

I replaced D800,D806,optocopler: IC 801,C623 :33mf/160v,C826: 47mf/160v,c822,c856,c812 but TV is in standby stat still.
when I conect R118 to ground TV turn on and power led stay green.
also voltage of Drain pin of Mosfet Q801 is unstable (27v...110v).
Voltage of D808(Katod pin) is 11.5v.
Back to top
View user's profile Send private message
Guest






PostPosted: Tue Jan 11, 2011 8:21 pm    Post subject: Reply with quote

i found problem.i replaced C827: 4700uf/16V .
this cpacitor was not short-cicuit but it was leaked.
Back to top
Guest






PostPosted: Fri Jan 14, 2011 3:37 pm    Post subject: Reply with quote

mahmoudesm wrote:
I replaced D800,D806,optocopler: IC 801,C623 :33mf/160v,C826: 47mf/160v,c822,c856,c812 but TV is in standby stat still.
when I conect R118 to ground TV turn on and power led stay green.
also voltage of Drain pin of Mosfet Q801 is unstable (27v...110v).
Voltage of D808(Katod pin) is 11.5v.

hello.
C613=10UF -50V near horizantal driver must replce.
zamani
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия