View previous topic :: View next topic |
Author |
Message |
mahmoudesm Guest
|
Posted: Fri Jan 07, 2011 8:55 pm Post subject: vestel 11ak30 standby problem |
|
|
i have vestel tv chasis 11ak30 ,it has processor st92195c3b1,and stv2246h .The problem is Standby state.power led is red .Bu808 is ok ,6n80 power suply mosfet is ok.i replaced st92195 .when i open pin 47 of syscon IC TV turn on what are other possibilties.... any one to guide me .thanks in advance. |
|
Back to top |
|
|
Guest
|
Posted: Sat Jan 08, 2011 4:44 pm Post subject: |
|
|
Does the LED stay solid red when you attempt to turn it on, or does it start flickering?
Try:
Check D800 - BA159 for short circuit
Replace D806 (it may read ok) |
|
Back to top |
|
|
Guest
|
Posted: Sat Jan 08, 2011 4:51 pm Post subject: |
|
|
Oh, and eeprom 24C08 may be the problem. Might need reprogramming or replacing. |
|
Back to top |
|
|
mahmoudesm
Joined: 08 Jan 2011 Posts: 2
|
Posted: Sun Jan 09, 2011 7:32 am Post subject: |
|
|
hi,thanks,i try chek it and go back,
yes led is flickering and i hear a sound like that chik..chik .chik! |
|
Back to top |
|
|
Guest
|
Posted: Sun Jan 09, 2011 4:41 pm Post subject: |
|
|
Another thing to check on 12V line is:
D810 (UF5402) in the PSU might be short-circuit. |
|
Back to top |
|
|
mahmoudesm
Joined: 08 Jan 2011 Posts: 2
|
Posted: Sun Jan 09, 2011 7:05 pm Post subject: |
|
|
I replaced D800,D806,optocopler: IC 801,C623 :33mf/160v,C826: 47mf/160v,c822,c856,c812 but TV is in standby stat still.
when I conect R118 to ground TV turn on and power led stay green.
also voltage of Drain pin of Mosfet Q801 is unstable (27v...110v).
Voltage of D808(Katod pin) is 11.5v. |
|
Back to top |
|
|
Guest
|
Posted: Tue Jan 11, 2011 8:21 pm Post subject: |
|
|
i found problem.i replaced C827: 4700uf/16V .
this cpacitor was not short-cicuit but it was leaked. |
|
Back to top |
|
|
Guest
|
Posted: Fri Jan 14, 2011 3:37 pm Post subject: |
|
|
mahmoudesm wrote: | I replaced D800,D806,optocopler: IC 801,C623 :33mf/160v,C826: 47mf/160v,c822,c856,c812 but TV is in standby stat still.
when I conect R118 to ground TV turn on and power led stay green.
also voltage of Drain pin of Mosfet Q801 is unstable (27v...110v).
Voltage of D808(Katod pin) is 11.5v. |
hello.
C613=10UF -50V near horizantal driver must replce.
zamani |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
2sa1276 Inchange Semiconductor • T-100 Accuphase • LBT-D220 Sony (Bulletin) • Panel CMO V315B3-LN1 2 [DS] . Various • c-2 HEATHKIT • ICFSW11 Sony • Roland GR-300 Service Manual Roland • 22sc5584 2 • STANFORD RESEARCH SYSTEMS SR850 Operatio • CNX82A.W, CNX83A.W, SL5582.W & SL5583.W •
|