View previous topic :: View next topic |
Author |
Message |
Ian D Guest
|
Posted: Sun Dec 11, 2005 6:28 pm Post subject: Philips 28PW6515/05 painter chip/set up |
|
|
I have the same problems with my 28PW6515/05, I am happy to get the painter chip replaced by MCES but can someone enlighten me as to how to set up the option codes and geometry in case I need to do that.... thanks |
|
Back to top |
|
|
Guest
|
Posted: Mon Dec 12, 2005 9:11 pm Post subject: |
|
|
hi download the phillips a10 service manual from this website, then to access the SAM, with the RC press the following code:
062596 then press the I+ button. may take a couple of attempts, you need to be quite quick.
the I+ button is the one you press to see the OSD.
All the parameters are in the manual, take a note of your options before sending your board off. |
|
Back to top |
|
|
Notele Guest
|
Posted: Fri Apr 14, 2006 7:09 pm Post subject: 28pw6515/05 |
|
|
I think I may have the same problem but I have an "F" appearing at the top right hand corner of my screen. Can someone confirm it is definately the painterchip? |
|
Back to top |
|
|
gary
Joined: 05 Apr 2005 Posts: 584 Location: MANCHESTER, uk
|
Posted: Tue Apr 18, 2006 4:07 pm Post subject: |
|
|
99.9% of function faults on these sets are due to the painter ic, can never be 100% sure but i wouldnt hesitate in blaming it for that fault. |
|
Back to top |
|
|
Notele Guest
|
Posted: Wed Apr 19, 2006 1:04 am Post subject: |
|
|
Thanks for your help Gary. |
|
Back to top |
|
|
andyowen Guest
|
Posted: Fri May 26, 2006 8:03 pm Post subject: |
|
|
Can anyone tell me if the painter chip boards are interchangable between 28" and 32" sets? The info on the 2 chips are similar but not exact.
Thanks in advance |
|
Back to top |
|
|
Lenny Guest
|
Posted: Wed Aug 09, 2006 5:01 pm Post subject: Same Problem |
|
|
Hi... I have exactly the same fault as Jimb. I spoke to a philips shop and to my disgust discovered that this is a very common fault with this model of tv. I was then told I should be grateful its only the remote system that has failed. Other people loose the picture or the sound. Personally I think its disgusting and will never go near a shitty philips product again. I'm angry at their attitude towards the problem and how the tv went faulty after about 2 years. Why should I have to pay to get it fixed?
Cheers |
|
Back to top |
|
|
gary
Joined: 05 Apr 2005 Posts: 584 Location: MANCHESTER, uk
|
Posted: Wed Aug 09, 2006 5:27 pm Post subject: |
|
|
i see a lot of these sets, 80% have painter ic failure, the other 20% have crt failure. over 90% of the sets i see with crt failure are fitted with philips crts. i will let you draw your own conclusions!!!!! |
|
Back to top |
|
|
|
|