electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Pfaff 7570

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Service manuals & datasheets
View previous topic :: View next topic  
Author Message
ewecansew
Guest





PostPosted: Sat Sep 21, 2013 8:55 pm    Post subject: Pfaff 7570 Reply with quote

I am looking for the instructions to reset the Pfaff 7570 to default settings? We have just changed the battery and the stitches are not the right size on any setting.
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Sun Sep 22, 2013 2:22 am    Post subject: Reply with quote

Everything was fine, but hadn't ever changed the batteries ... now 'this?'
OR
Hoping to alleviate 'this' by changing the batteries?


Changing the batteries:
Switch on the sewing machine to avoid deleting the memories during the battery change.
Tilt the machine over on the side as illustrated. The battery compartment is installed in the base. Using a screwdriver lightly push the catch into
recess A, lift it, and remove the cover. Take out the batteries. Insert the new batteries E with the + side facing upwards.
Insertion of the batteries is done in reverse order.

Note: After changing the batteries, the contents of the memories should be checked.
Spare batteries: 2 Mignon cells 1.5 V; type LR 6.
Only use leak-proof batteries!
_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
ewecansew
Guest





PostPosted: Sun Sep 22, 2013 2:39 am    Post subject: Pfaff 7570 Reply with quote

The machine was turned off when changing the batteries--the display said low battery--then on turning on the machine made a almost weird noise, and now will not go to default (2.5 length) when turning on the machine.
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Sun Sep 22, 2013 3:11 am    Post subject: Reply with quote

Switch on the sewing machine to avoid deleting the memories during the battery change.

If the batteries are weak or no batteries have been
inserted, the message “Change batteries” will
appear in the display when you switch the machine
on. If the batteries are too weak, the programmed
P-designs and the stored patterns in a pattern se
quence will be lost. If there are no batteries in the
machine, press the “o.k.” key or activate the foot
control.Then the machine will be ready to sew.
(For battery change see page 156.)


Can a program be added to a memory location?
(Instruction manual is available via a Google search.)
_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
ewecansew
Guest





PostPosted: Sun Sep 22, 2013 3:59 pm    Post subject: Reply with quote

There should be a sequence of buttons to push to get to factory default. this would be in a service manual---we have the machine manual, but not the service manual.
Back to top
jts1957



Joined: 24 Nov 2008
Posts: 2476
Location: Far, Far Away

PostPosted: Sun Sep 22, 2013 6:11 pm    Post subject: Reply with quote

If you say so...

Service manual is also available via a Google search. (Alas, I could not find one for 'free.')
_________________
You're over there, I'm over here.
Back to top
View user's profile Send private message
ewecansew
Guest





PostPosted: Sun Sep 22, 2013 7:51 pm    Post subject: Reply with quote

I also found the ones you could buy---was hoping someone could help me. I was a Pfaff dealer until 2 months ago and now cannot access the service manuals. I wouldn't think I would need the whole manual, just the reset information.
Back to top
ewecansew
Guest





PostPosted: Sun Sep 22, 2013 11:50 pm    Post subject: Reply with quote

Thanks so much, jt, for your help!
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Service manuals & datasheets All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия