View previous topic :: View next topic |
Author |
Message |
kulik Guest
|
Posted: Sat May 13, 2006 5:58 pm Post subject: IBM ThinkPad battery refill |
|
|
I changed Li-Ion cells in lapptop ThinkPad T22 battery, but there is no voltage on output of the battery gas-gage electronic. Before it was OK.
On battery side of gas-gage electronic is 11.4V.
During the refill process the gas-gage has been disconnected completely and later connected to cells again.
I have two explanations
1. the electronic inside disconnect the output
2. the electronic inside is damaged because I connected cells in correct polarity but random order (not ground first, max. plus second, ...).
There are 4 MOSFET driven by M61040FP and processor M37516.
Pls, do you have any advice? |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
B51-8585-20-SDP Kenwood • am83135-03 ST • RC-754 Rolsen • SI4835BDY - P-Channel 30-V (D-S) MOSFET • fdd8874 fdu8874 Fairchild Semiconductor • easynote a7 versa s940 PACKARD BELL • om23p06st . Electronic Components Datash • Service Manual 22AH386 Philips • Process Flow Sony Ericsson • pcga-dsd5 Sony •
|