View previous topic :: View next topic |
Author |
Message |
hydrosausager
Joined: 12 Jan 2016 Posts: 3
|
Posted: Tue Jan 12, 2016 3:53 pm Post subject: Philips 19PFL5403/60 JSY-190406B (invertor manual) |
|
|
looking for 81-BLI009-XX2(model JSY-190406B) circuit
|
|
Back to top |
|
|
jts1957
Joined: 24 Nov 2008 Posts: 2476 Location: Far, Far Away
|
Posted: Tue Jan 12, 2016 4:51 pm Post subject: |
|
|
Is B-Plus present and 'clean,' and is B-Plus and enable present at the correct points and times?
A dried out electrolytic? There's only one.
Bad bulb(s)? Less likely.
Bad transformer winding? Less likely.
Since you've already jumpered the fuse on the 'invertor,' and it ran a couple of months, then dual FETs are possibly defective.
Can I presume after jumpering fuse, that a every 5 to 10 minute heat build up test was done on major semi's, lytics (also check ones on power supply that feed inverter), etc.?
Looks like a relatively 'simple' inverter. All semiconductors should have datasheets available. _________________ You're over there, I'm over here. |
|
Back to top |
|
|
hydrosausager
Joined: 12 Jan 2016 Posts: 3
|
Posted: Tue Jan 12, 2016 5:25 pm Post subject: |
|
|
jts1957 wrote: |
Since you've already jumpered the fuse on the 'invertor,' and it ran a couple of months, then dual FETs are possibly defective.
|
Yes, you are right, some FETs realy defective, i have allready changed it, but the problem is what tl494 and lm393 (probably) died to, i changed them and another pnp/npn transistors but the main probles is, what when i was checking and changing transistors, i forgot to mark two of this and now i have 1 fet and 1 pnp and i realy dont know where is the plase for them on the board...
(sry for my english) |
|
Back to top |
|
|
hydrosausager
Joined: 12 Jan 2016 Posts: 3
|
Posted: Thu Jan 14, 2016 4:03 pm Post subject: Re: Philips 19PFL5403/60 JSY-190406B (invertor manual) |
|
|
[quote="hydrosausager"]looking for 81-BLI009-XX2(model JSY-190406B) circuit
Please, anyone, help |
|
Back to top |
|
|
jmmy147
Joined: 26 Feb 2016 Posts: 1
|
Posted: Fri Feb 26, 2016 6:30 am Post subject: |
|
|
Can I presume after jumpering fuse, that a every 5 to 10 minute heat build up test was done on major semi's, lytics (also check ones on power supply that feed inverter), etc.? |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
Logik repair tips Logik • B53-0084-00-PCB Kenwood • 486 901 01D Keithley • aspire 3000, 3500, 5000 series service g • SOM+PHILIPS+FWM+416 Philips • NPE3-027 NOKIA • RIGOL DG2000 user 2527s Rigol • Fluke-Test-Tools-2012-2013 Fluke • • idc a09 blaupunkt •
|