Mitsubishi VS 50705 error code 23

[jts1957]

Better check bridge rectifier diodes in D951 (at least in power supply).
Man you're jumping all over the chassis. I don't see how the set was working - even for error codes

C451 181P186000 C-ELEC-50V 100M-M 105C
C903 189P185070 C-CER - AC250V E1000P-M
C904 189P185070 C-CER - AC250V E1000P-M
C951 189P185090 C-CER - AC250V E2200P-M
C952 189P185090 C-CER - AC250V E2200P-M
C954 189P185090 C-CER - AC250V E2200P-M
C955 189P185090 C-CER - AC250V E2200P-M
_________________
You're over there, I'm over here.

[DMW649]

Where can I get these caps that match the part numbers? Thanks, Dennis

[jts1957]

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=445-2422-ND

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=445-2424-ND

Both are only suggestions. You can do you own part search and base it on your exact parameters (physical size, pin spacing, etc.). You can obtain electrolytic capacitors there too.
_________________
You're over there, I'm over here.

[annakenna]

Hi Dennis,

Based on the information provided, it seems like your 10-year-old TV is experiencing a horizontal deflection failure, which is causing the error code 2-3. This issue is likely caused by a problem with the TV's electronics, possibly a failed component in the horizontal deflection circuit.

Since you had a successful repair in the past by replacing capacitors, I would suggest starting there. Check if any of the capacitors in the horizontal deflection section have failed or are showing signs of wear. Replace any suspicious components and see if that resolves the issue.

If the problem persists, you may need to have the TV serviced by a qualified technician, as further diagnosis and repair of the horizontal deflection circuit may be required.
_________________
rice purity test