View previous topic :: View next topic |
Author |
Message |
Guest
|
Posted: Tue Oct 10, 2006 4:53 am Post subject: Grundig Argento 82 MW 82-500 IRDT TV |
|
|
I've got a Grundig TV as described in the post title.
Just recently the picture has been flicking off and on until last
Sunday the TV refused to switch on from Standby.
When I push the main ON button the TV emits a brief crackle from the
speakers and goes to Standby without displaying a picture. If I try to
operate the TV via the remote or the panel buttons the LED turns
briefly green and then back to red. I can get nothing more
The Chassis on my TV is a CUC 2058.
If anyone has any info on this model or any other insight into what
the problem is I'd much
appreciate it.
Regards. |
|
Back to top |
|
|
Guest
|
Posted: Tue Oct 10, 2006 5:14 pm Post subject: |
|
|
As much as I have Experience with TV Sets, I would look for cold soldering points first, which could have caused the flickering at first, maybe because of that something in the horizontal deflection died. There should be a rather large diode on the secondary side of the power transformer leading to a rather large transistor near the line transformer which could both have shortcut (excuse my English).
These are defect by lots of TVs, at least the ones I had to fix... |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
lg 50pc5d LG • manualst Philips • QST0010DG040110REV9 panasonic • s pa 02 panasonic • MF002A LG • PS1400 JBL • 2-8 Rolsen • 1408RX | 1408TY Hitachi • aa09sys1 panasonic • sch7 9 panasonic •
|