View previous topic :: View next topic |
Author |
Message |
jaihind
Joined: 15 Nov 2006 Posts: 3
|
Posted: Wed Nov 15, 2006 12:56 pm Post subject: SCHNEIDER STV-2802 [Raster gradually washes out screen] |
|
|
Help !!!!
Could someone help me in identifying the fault for this TV of mine. After few mins. of it being switched on, the screen begins to get filled with 'retrace lines' and then gets steadily white and no picture is seen. I tried tweaking the EHT transformer at the back and it improves it slightly, but the contrast gets ruined and often there is a 'blooming' effect.
One solution I found was that immediately on TV switch on, if I mute the sound using the remote, then the picture remains clear as long as the TV is on. If I connect a set of speakers to the headphone out, I can hear sound .. so really sound from the TV speakers (muted by the remote) isn't required. Yet there must be some fault between the TV sound and this picture wash out. The TV has a NICAM sound system.
Any ideas?
Many thanks |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
Panel SHARP LJ64HM01 1 [DS] . Various • tx p42st32y panasonic • SUBTS1 Harman/Kardon • TX807C Thomson • Phonola 622 PHONOLA • CPD E400P sony • mgsf1p02lt1 Motorola • Vishay [ thru-hole] 142 RHS Series RADI • PSG1203019CE PRINTDB panasonic • irf840lc International Rectifier •
|