| View previous topic :: View next topic |
| Author |
Message |
DrMcKay
Joined: 01 May 2007
Posts: 7
|
 Posted: Tue May 01, 2007 3:04 pm Post subject: Help me to safe my Akai vs-245s |
 |
|
hello!!
I've fixed my akai, because it had no power.Now it can load a tape, but no make any functions.
There are 3 led which light, they are pause, memory, and standby.
Please help me.
I love this vintage VCR
So this fault is written in Euras database but I can't have the acces
And, I'm french, and I'm apologized for my mistakes in english |
|
| Back to top |
|
 |
ropris
Guest
|
| Posted: Mon May 07, 2007 12:51 pm Post subject: Akai 245 |
|
|
| Cherche ton circiut imprime maitre ; la il existe encore a moins une fusible |
|
| Back to top |
|
|
DrMcKay
Joined: 01 May 2007
Posts: 7
|
| Posted: Mon May 07, 2007 4:58 pm Post subject: Fuse |
|
|
Hi!
Thank you for your answer.
I'm just check, and it seems that the FR308 is dead (0 ohm), I will change this fuse, and I will write here when i've done.
Un grand merci pour m'aider dans ma quete.
A bientot |
|
| Back to top |
|
|
DrMcKay
Joined: 01 May 2007
Posts: 7
|
| Posted: Tue May 08, 2007 10:15 am Post subject: Suite |
|
|
Hi
I've changed the Fr308 by a 2.2 Kohm reistor, and now He don't load the tape, and the pause light but a very little, Why??
I've changed FR701 on the power board, by a R 470 Ohm.
Please, help me,
Thx! |
|
| Back to top |
|
|
DrMcKay
Joined: 01 May 2007
Posts: 7
|
| Posted: Tue May 08, 2007 10:59 am Post subject: re |
|
|
| I've seen, that I've made a mistake, on the fuse R it writte 2R2, that means 2,2Ohm and not 2.2K ohm... I'm going to correct this error. |
|
| Back to top |
|
|
DrMcKay
Joined: 01 May 2007
Posts: 7
|
| Posted: Tue May 08, 2007 11:20 am Post subject: 3 led.... |
|
|
Now, after have corrected, he load a tape, and light on the 3 led, pause, standby, and memory.
Every R fuse have been tested.
Any solution? |
|
| Back to top |
|
|
DrMKay
Guest
|
| Posted: Sat May 12, 2007 7:05 am Post subject: He works!!! |
|
|
So, the diagram circuit showed the R310 with 470 Ohm, and the 12 V is become 6V, I've put a 47 ohm and he work fine!!
All fuse resistance have bad values, its surprising.
But, le VCR has no coulour at display, I search a solution for the moment.
The audio quality is very good like the picture but in B&W. |
|
| Back to top |
|
|
DrMkay
Guest
|
| Posted: Sat May 12, 2007 7:16 am Post subject: I've forgotten this... |
|
|
| I've forgotten to say this: He can't record, and when he is ON, he display only the enter scart (like a Xbox signal), the channel doen't work. |
|
| Back to top |
|
|
|
|
|
FAQ
