electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Help me to safe my Akai vs-245s

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Service manuals & datasheets
View previous topic :: View next topic  
Author Message
DrMcKay



Joined: 01 May 2007
Posts: 7

PostPosted: Tue May 01, 2007 3:04 pm    Post subject: Help me to safe my Akai vs-245s Reply with quote

hello!!

I've fixed my akai, because it had no power.Now it can load a tape, but no make any functions.
There are 3 led which light, they are pause, memory, and standby.
Please help me.
I love this vintage VCR
So this fault is written in Euras database but I can't have the acces

And, I'm french, and I'm apologized for my mistakes in english
Back to top
View user's profile Send private message
ropris
Guest





PostPosted: Mon May 07, 2007 12:51 pm    Post subject: Akai 245 Reply with quote

Cherche ton circiut imprime maitre ; la il existe encore a moins une fusible
Back to top
DrMcKay



Joined: 01 May 2007
Posts: 7

PostPosted: Mon May 07, 2007 4:58 pm    Post subject: Fuse Reply with quote

Hi!
Thank you for your answer.
I'm just check, and it seems that the FR308 is dead (0 ohm), I will change this fuse, and I will write here when i've done.

Un grand merci pour m'aider dans ma quete.
A bientot
Back to top
View user's profile Send private message
DrMcKay



Joined: 01 May 2007
Posts: 7

PostPosted: Tue May 08, 2007 10:15 am    Post subject: Suite Reply with quote

Hi
I've changed the Fr308 by a 2.2 Kohm reistor, and now He don't load the tape, and the pause light but a very little, Why??
I've changed FR701 on the power board, by a R 470 Ohm.
Please, help me,
Thx!
Back to top
View user's profile Send private message
DrMcKay



Joined: 01 May 2007
Posts: 7

PostPosted: Tue May 08, 2007 10:59 am    Post subject: re Reply with quote

I've seen, that I've made a mistake, on the fuse R it writte 2R2, that means 2,2Ohm and not 2.2K ohm... I'm going to correct this error.
Back to top
View user's profile Send private message
DrMcKay



Joined: 01 May 2007
Posts: 7

PostPosted: Tue May 08, 2007 11:20 am    Post subject: 3 led.... Reply with quote

Now, after have corrected, he load a tape, and light on the 3 led, pause, standby, and memory.
Every R fuse have been tested.
Any solution?
Back to top
View user's profile Send private message
DrMKay
Guest





PostPosted: Sat May 12, 2007 7:05 am    Post subject: He works!!! Reply with quote

So, the diagram circuit showed the R310 with 470 Ohm, and the 12 V is become 6V, I've put a 47 ohm and he work fine!!
All fuse resistance have bad values, its surprising.

But, le VCR has no coulour at display, I search a solution for the moment.
The audio quality is very good like the picture but in B&W.
Back to top
DrMkay
Guest





PostPosted: Sat May 12, 2007 7:16 am    Post subject: I've forgotten this... Reply with quote

I've forgotten to say this: He can't record, and when he is ON, he display only the enter scart (like a Xbox signal), the channel doen't work.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Service manuals & datasheets All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия