electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
help ! TV PHILLIPS 32PW6006/21
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
seti



Joined: 12 Oct 2007
Posts: 10

PostPosted: Fri Oct 12, 2007 10:27 am    Post subject: help ! TV PHILLIPS 32PW6006/21 Reply with quote

hello all ( I excuse myself I am French )
I board a probléme with my television set PHILLIPS 32PW6006/21 frame L01.2E (8 years) the image at the beginning was crushed I board changed 3 condensers (see the bond below.) I light television is, plus nothing! ? a black screen a white line in top of the screen and the television set eteint after 4 A 6 seconds? thank you for your assistance here thus what I had

thanks

before changing the 3 condensers
http://www.boostupload.com/files/362_ScreenShot002.jpg

after change of the condensers
http://www.boostupload.com/files/747_ScreenShot004.jpg

VG2 a "2hour"
http://www.boostupload.com/img.php?i=615_ScreenShot005.jpg

VG2 a "11hour"
http://www.boostupload.com/img.php?i=684_ScreenShot006.jpg
Back to top
View user's profile Send private message
seti



Joined: 12 Oct 2007
Posts: 10

PostPosted: Fri Oct 12, 2007 2:43 pm    Post subject: Reply with quote

BU4508 dead ..+....?
Back to top
View user's profile Send private message
bash



Joined: 10 Sep 2007
Posts: 8

PostPosted: Sat Oct 13, 2007 12:51 am    Post subject: Reply with quote

seti wrote:
BU4508 dead ..+....?



seti check this link see if your trouble is in here:

http://www.download.nitd.co.uk/page.php?22
Back to top
View user's profile Send private message
tsgunnell



Joined: 03 Jun 2004
Posts: 49
Location: middx england

PostPosted: Sat Oct 13, 2007 4:29 am    Post subject: Reply with quote

your original fault was an east to west pincushion fault .but since your work on it you have a field fault one of the capacitor you changed couples to the line drive if you made an error here this could cause the lopt transistor to blow the others were in the east to west circuit double check the work you have done .ie correct value capacitors the right way round etc .all of us on here must at some times ended up with more faults than when we started good luck-
Back to top
View user's profile Send private message
seti



Joined: 12 Oct 2007
Posts: 10

PostPosted: Sat Oct 13, 2007 12:22 pm    Post subject: Reply with quote

thank bash
you your bond is fantastic!! much information thank you very much. I
change the aprés BU4508 this midday and I
thank you inform you for your assistance (tsgunnell , bash )

I espere that you will continue helped me if France gains the match of Rugby this after midday!
Back to top
View user's profile Send private message
seti



Joined: 12 Oct 2007
Posts: 10

PostPosted: Sat Oct 13, 2007 12:25 pm    Post subject: Reply with quote

I espere that you will continue helped me if France gains the match of Rugby this after midday!
[/quote]

I espere that you will continue helped me if France gains the match of Rugby this after noon !
of course ....sorry !!!
Back to top
View user's profile Send private message
seti



Joined: 12 Oct 2007
Posts: 10

PostPosted: Sat Oct 13, 2007 5:16 pm    Post subject: Reply with quote

I do not know any more! very disappointed !
I board changed the BU4508 and it is the same thing! black screen has lighting and 4 seconds after television puts in safety
the tensions measured
-------->
http://www.boostupload.com/img.php?i=511_ScreenShot001.jpg
http://www.boostupload.com/img.php?i=584_ScreenShot002.jpg
Back to top
View user's profile Send private message
frank
Guest





PostPosted: Sat Oct 13, 2007 9:58 pm    Post subject: Reply with quote

You have to use OEM
Back to top
seti



Joined: 12 Oct 2007
Posts: 10

PostPosted: Sat Oct 13, 2007 10:28 pm    Post subject: Reply with quote

? I do not understand that want you to say?
Back to top
View user's profile Send private message
seti



Joined: 12 Oct 2007
Posts: 10

PostPosted: Sun Oct 14, 2007 11:31 am    Post subject: Reply with quote

after 2...10 sec -----> put in safety
http://www.boostupload.com/files/851_tension1.jpg
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия