electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Hitachi 53fdx01b no picture
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
kp06



Joined: 06 Feb 2007
Posts: 15
Location: Bonne Terre MO

PostPosted: Fri Feb 29, 2008 6:46 pm    Post subject: Hitachi 53fdx01b no picture Reply with quote

I have the above tv with no picture. Tried replacing the str-f6629b with no luck. I think it has something to do with the power supply. Pin 4 on the str-f6629b is supposed to read +14-18V but it reads -36V.
Back to top
View user's profile Send private message Send e-mail
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Fri Feb 29, 2008 7:15 pm    Post subject: Reply with quote

Did you check pico fuse EP 91?
Back to top
View user's profile Send private message Send e-mail
Guest






PostPosted: Sun Mar 02, 2008 5:31 pm    Post subject: Reply with quote

yeah it checks out good.
Back to top
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Sun Mar 02, 2008 6:53 pm    Post subject: Reply with quote

I'd replace the convergence IC's and check the resistors next.
Back to top
View user's profile Send private message Send e-mail
kp06



Joined: 06 Feb 2007
Posts: 15
Location: Bonne Terre MO

PostPosted: Mon Mar 17, 2008 4:55 am    Post subject: Reply with quote

The resistors check out good I think it has to do with the power supply.
Back to top
View user's profile Send private message Send e-mail
Guest






PostPosted: Mon Mar 17, 2008 10:33 pm    Post subject: Reply with quote

Convergence IC's will cause a dead set.
Back to top
Guest






PostPosted: Thu Mar 20, 2008 7:25 am    Post subject: Reply with quote

I to have the same problem. Replaced the convergence IC's and still same problem. The set will not power on. I get the relay clicks and all the led's come on but it makes a whine sound over and over like its trying to start but never comes on. I dont know that is making the high pitched sound but when I touch leg 1 of STR-F6629B with the volt meter the tone of the sound changes. I am going to try replacing that next. Checking voltages on the other Regulators Q777 I get 58 volts on the 2 outer legs. So something is not right.
Back to top
kp06



Joined: 06 Feb 2007
Posts: 15
Location: Bonne Terre MO

PostPosted: Wed Dec 10, 2008 8:36 pm    Post subject: Reply with quote

Yeah I am getting a strange voltage there too. Something like 56 volts. did you ever figure it out?
Back to top
View user's profile Send private message Send e-mail
minnie



Joined: 18 Aug 2005
Posts: 2880
Location: Hell

PostPosted: Wed Dec 10, 2008 10:25 pm    Post subject: Reply with quote

This is known for the horizontal output transistor shorting.
Back to top
View user's profile Send private message Send e-mail
kp06



Joined: 06 Feb 2007
Posts: 15
Location: Bonne Terre MO

PostPosted: Thu Dec 11, 2008 3:50 am    Post subject: Reply with quote

Where is that located?(I dont have the TV or Manual where im at)
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия