electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
Monitor philips 107s pincushion distortion
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
Ros3bud



Joined: 17 Jun 2005
Posts: 5

PostPosted: Fri Jun 17, 2005 7:58 am    Post subject: Monitor philips 107s pincushion distortion Reply with quote

Hi Wink

First of all, sorry for my english, i'm a french guy Laughing

My CRT monitor Philips 107S (17") has a pincushion distortion like this : ) (

When i start it, the screen is normal but when it gets warmer, the deformation is coming up.

If i hit the monitor, it sometimes disappears but the default come back in the few minutes and it's then definitive.

I've already checked the weldings on video pcb and main pcb but i didn't see anything.

I have the complete schematics of this monitor but i'm not electronician so ...

Confused Wink
Back to top
View user's profile Send private message
SHELDONS TV



Joined: 22 Apr 2005
Posts: 25
Location: ENGLAND

PostPosted: Fri Jun 17, 2005 11:32 am    Post subject: pin amp not working Reply with quote

Very Happy If you email the schematics to my address-
[email protected]
i may be able to help you...
regards mike
Back to top
View user's profile Send private message Send e-mail
Ros3bud



Joined: 17 Jun 2005
Posts: 5

PostPosted: Fri Jun 17, 2005 1:31 pm    Post subject: Re: pin amp not working Reply with quote

SHELDONS TV wrote:
Very Happy If you email the schematics to my address-
[email protected]
i may be able to help you...
regards mike



ok it's done Wink
Back to top
View user's profile Send private message
SHELDONS TV



Joined: 22 Apr 2005
Posts: 25
Location: ENGLAND

PostPosted: Sat Jun 18, 2005 12:02 pm    Post subject: Reply with quote

Very Happy ill have a look on monday when im back at the shop...
regards mike
Back to top
View user's profile Send private message Send e-mail
Ros3bud



Joined: 17 Jun 2005
Posts: 5

PostPosted: Sat Jun 18, 2005 8:47 pm    Post subject: Reply with quote

SHELDONS TV wrote:
Very Happy ill have a look on monday when im back at the shop...
regards mike


Thanks Wink
Back to top
View user's profile Send private message
Ros3bud



Joined: 17 Jun 2005
Posts: 5

PostPosted: Thu Jun 23, 2005 3:26 pm    Post subject: Reply with quote

Hi Mike Very Happy

Did you have a look at the 107S' schematics i sent to you ?

Wink
ros3bud
Back to top
View user's profile Send private message
zalds
Guest





PostPosted: Thu Jun 23, 2005 11:24 pm    Post subject: monitor Reply with quote

try to resolder the pincusion section even and also if thier is coil and small transformer solder it again sometimes the loss conection is on the pin inside the coil
Back to top
SchietSchijf
Guest





PostPosted: Tue Oct 18, 2005 7:02 pm    Post subject: schematics Reply with quote

Hello,

Could you send the schematics for the 109S philips monitor also to me

My email is [email protected]

Thanks in advance.
Back to top
Ros3bud



Joined: 17 Jun 2005
Posts: 5

PostPosted: Tue Oct 18, 2005 8:33 pm    Post subject: Re: schematics Reply with quote

SchietSchijf wrote:
Hello,

Could you send the schematics for the 109S philips monitor also to me

My email is [email protected]

Thanks in advance.


I only have 107s schematics Confused Wink
Back to top
View user's profile Send private message
SHELDONS TV



Joined: 22 Apr 2005
Posts: 25
Location: ENGLAND

PostPosted: Wed Oct 19, 2005 7:12 am    Post subject: Reply with quote

Very Happy Have a close look at your soldered joints in the line op stage especially the ew driver and modulator-if you havent any visible dry joints you may have a board break-
regards mike
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия