electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
radio code for audio nissan pp9940 h
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Decode, Unlock, Service and hotel mode entry HowTo
View previous topic :: View next topic  
Author Message
marinsirakov



Joined: 07 Sep 2018
Posts: 6

PostPosted: Fri Sep 07, 2018 6:59 am    Post subject: radio code for audio nissan pp9940 h Reply with quote

Hello dear,
My original radio brake and i found another to replace. The new one is model Nissan PP-9949-H. It fits OK and also the cable jacks are OK. The problem is that when i switch it on it shows - - - - . No one key is active ...

I want to ask how can activate the menu to put the code in. Also can yo please generate me code?

the model is: cl0344w0001729
part n is: 286-8177-51

I will be very helpful because there isn't any information about this radio model - it is old but I still drive my Terrano.

Thanks !
Back to top
View user's profile Send private message
tmcu



Joined: 13 May 2007
Posts: 1245
Location: UK

PostPosted: Fri Sep 07, 2018 7:19 am    Post subject: Re: radio code for audio nissan pp9940 h Reply with quote

marinsirakov wrote:
Hello dear,
My original radio brake and i found another to replace. The new one is model Nissan PP-9949-H. It fits OK and also the cable jacks are OK. The problem is that when i switch it on it shows - - - - . No one key is active ...

I want to ask how can activate the menu to put the code in. Also can yo please generate me code?

the model is: cl0344w0001729
part n is: 286-8177-51

I will be very helpful because there isn't any information about this radio model - it is old but I still drive my Terrano.

Thanks !


We can only help with clarion if it has an extra sticker with a number like
C70000001234 , unfortunately not all clarion's have this !
Back to top
View user's profile Send private message
marinsirakov



Joined: 07 Sep 2018
Posts: 6

PostPosted: Fri Sep 07, 2018 8:07 am    Post subject: Reply with quote

Unfortunately I don't see any additional sticker.

At least can you advice me how can I get to the menu I will be in order to set the code
Back to top
View user's profile Send private message
marinsirakov



Joined: 07 Sep 2018
Posts: 6

PostPosted: Fri Sep 07, 2018 8:10 am    Post subject: Reply with quote

I find in a website this d78014gc726 if is usefull
Back to top
View user's profile Send private message
tmcu



Joined: 13 May 2007
Posts: 1245
Location: UK

PostPosted: Fri Sep 07, 2018 12:43 pm    Post subject: Reply with quote

marinsirakov wrote:
I find in a website this d78014gc726 if is usefull


This reference is the cpu used in it I think , the code entry instructions seem
very simple and don't mention a menu ?

https://www.radio-code.co.uk/PP9940H-Nissan-code-entry-guide

Your radio is locked out through incorrect code entry attempts , so you need to leave it turned on continuously until it resets , it can be several hours depending on the number of incorrect attempts.
Back to top
View user's profile Send private message
marinsirakov



Joined: 07 Sep 2018
Posts: 6

PostPosted: Fri Sep 07, 2018 1:34 pm    Post subject: Reply with quote

Unfortunately Clarion codes are currently unavailable on this website. Can you advice me any other code generator ?

Will be thankful
[/img]
Back to top
View user's profile Send private message
tmcu



Joined: 13 May 2007
Posts: 1245
Location: UK

PostPosted: Fri Sep 07, 2018 3:52 pm    Post subject: Reply with quote

marinsirakov wrote:
Unfortunately Clarion codes are currently unavailable on this website. Can you advice me any other code generator ?

Will be thankful
[/img]


Having considered this again when you don't know the history of this radio I think it may be better to get it recoded by a local recoding service ,otherwise you may pay for the original code from an online service only to find it doesn't work because the radio has been recoded previously !
You should find a local recoding service by a search ( google ? ) online or maybe a radio repair shop !
Back to top
View user's profile Send private message
marinsirakov



Joined: 07 Sep 2018
Posts: 6

PostPosted: Sat Sep 08, 2018 5:50 pm    Post subject: Reply with quote

Anyway, today i left tue radio switched on and after 3 hours it went to the code menu. Can you advice me any number code to try. It mught work properly, if now I will go to radio specialist. In the region I life they are not too much. I afraid the result will be same as if i try unstable code...
Back to top
View user's profile Send private message
tmcu



Joined: 13 May 2007
Posts: 1245
Location: UK

PostPosted: Sun Sep 09, 2018 7:49 am    Post subject: Reply with quote

marinsirakov wrote:
Anyway, today i left tue radio switched on and after 3 hours it went to the code menu. Can you advice me any number code to try. It mught work properly, if now I will go to radio specialist. In the region I life they are not too much. I afraid the result will be same as if i try unstable code...


If you try too many incorrect codes it will lock up for good , I think its best to try to find a specialist now to read the code for you ! Good luck !
Back to top
View user's profile Send private message
marinsirakov



Joined: 07 Sep 2018
Posts: 6

PostPosted: Tue Sep 18, 2018 6:58 am    Post subject: Reply with quote

I went to the technical and he told me that he dont know how to decode it. There is a micro chip but he cant supply same, so maybe still the best way is if anybody can help me with a hack code. I should pay for it. Otherwise I need another audio. The problem is that this audio is easy to be connected with the CD changer ... If anybody can help me I will be very pleased !
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Decode, Unlock, Service and hotel mode entry HowTo All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия