View previous topic :: View next topic |
Author |
Message |
andreavanna
Joined: 06 Dec 2006 Posts: 3 Location: Italy
|
Posted: Thu Dec 28, 2006 7:49 pm Post subject: Philips 29PT700B/00 CHASIS GR2.4 Remote control problem |
|
|
Hi All,
Model: Philips 29PT700B/00 CHASIS GR2.4
Problem: TV does not respond to the IR remote control (RC), no volume controle, no stdby, no channel change...nothing!
However, the RC handset does work and the IR receiver also responds to the RC handset. The handset communicates to pin 35 of MCU 87CM36. When I "scope" pin 35 I see no "pulses".
Now, in series with pin 35 is a jumper (4709). When I open the jumper and scope it (pin 35 not connected) I see the pulses.
Further, when I measure the impedance from pin 35 to ground I get 68ohm.
History: I have replaced the LOPT.
Would someone please tell me how to fix this problem.
Thanks for your concern |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
VP2650WB-1 SM Rev.1b May.2008 Viewsonic • HP 8642 Partial Service Manual Agilent • nds9936 Fairchild Semiconductor • mje18004 . Electronic Components Datashe • CS480 2 LG • Panel SAMSUNG LTA230AN01 2 [DS] . Variou • std50n03l std50n03l-1 ST • 1610apx0 Riso • GDM17SE2T Sony • 2sb1192 Inchange Semiconductor •
|