View previous topic :: View next topic |
Author |
Message |
mase Guest
|
Posted: Thu Jan 31, 2008 8:59 pm Post subject: hyundai hlt 3773 LCD stuck in standby |
|
|
when i plug in the only voltage present is 3.6-4.2v standby ..when i have managed to get it to switch on all the voltages are ok.when it wont switch on i get 3.6-4.2v on standby,if i turn it on i get a quick flash of approx 2.6 v on the 'power on' terminal and then it pulses that same 2.6v every second...with the power on but the power board disconnected from the main boardi get 4.99 v on standby,is it normal for the voltage drop from 4.99 to 3.6-4.2(set in off state),thanks[/img] |
|
Back to top |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
eServiceInfo on FB -
Service Manuals Free Download -
Service Diagrams
Free TV Schematics Download -
HARDW.net -
Pinout Master -
Jabse Service Manual Search -
Jabse.InK -
onTap.bg
SnimkiOt.com -
Poblizo.com : пътешествия
Latest Service Manuals :
8100b Fluke • download1 Pioneer • Б. Боровски и др. - Микропроцесори - уст • daewoo cp-002 Daewoo • DVP3120 philips • 657U Philips • std90n03l std90n03l-1 ST • 4350 HP • adverts University • •
|