electronics, repairs, service manuals and datasheets discussion community for the repairs professionals and technicians
FAQSearchMembersGroupsRegisterProfilePM'sLogin/Out
CT32D10B

 
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs
View previous topic :: View next topic  
Author Message
Frank
Guest





PostPosted: Fri Dec 28, 2007 11:40 pm    Post subject: CT32D10B Reply with quote

Hi guys, i have here a CT32D10B, that has this strange behavior like pic is good, but till it gets warm has this high volts arcening, i thought it was bad solder connections then i soldered everywhere but no avail,i suspect the flyback, and tube, it seem a little weak cause when adgusting G-2,and focus i get that arcenig ,and when taping does that too, but only till it gets warm ater that it doesn't, tv is 12 years old i guess it seems going down,any ideas thanks.
Back to top
The TV Guy
Guest





PostPosted: Sat Dec 29, 2007 9:05 am    Post subject: Arcing till tv warm Reply with quote

Hi Frank- suggest you check; B+; electros from ps to hoz; ihvt; hold down caps;pic tube for s/c- check eht correct also. regards ttvg.
Back to top
frank
Guest





PostPosted: Sat Dec 29, 2007 7:26 pm    Post subject: Re: Arcing till tv warm Reply with quote

The TV Guy wrote:
Hi Frank- suggest you check; B+; electros from ps to hoz; ihvt; hold down caps;pic tube for s/c- check eht correct also. regards ttvg.


Thanks Guy for your response.you may be right about caps,i should check those next. the set is at the customer's now,funny thing is when i had the back out it did not make that line pairing unless i turn the knobs on the flyback pots.or tap around the fly.as soon i put on the back cover there it starts to do that but just when cold. this intemittent faults get me crazy.it would be easier if components go dead.i suspect also the customer is getting a good excuse to buy a LCD.he doesn't want to spend much money on a 12 year set .
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Electronic equipment repair and service manual search discussion Forum Index -> Equipment Repairs All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


eServiceInfo on FB - Service Manuals Free Download - Service Diagrams

Free TV Schematics Download - HARDW.net - Pinout Master - Jabse Service Manual Search - Jabse.InK  - onTap.bg

SnimkiOt.com - Poblizo.com : пътешествия