Pioneer 50" Plasma PDP-502MX

[shosho71]

How do u find out if your plasma has a recall on certain parts?
Please email me at [email protected] if you know how I can find out.
I have a pdp-v501x plasma with the same issue but I noticed its not on your list. Also my video board is going out

[circuit]

[quote="Andrew99"]Yes! that's the one... but...

AWZ6405 POWER SUPPLY (NLA - SEE NOTE)

NLA in the note means "no longer available"

I sent a Email to Pioneer asking if there was a compatable one
available. Still a new one from Pioneer is going to run me about $400
if there even is one.

What would be great is if I could repair mine. I have full PDF schematics
and calibration documents on it and it all looks like a pretty straight
forward Power Supply. I could buy a lot of caps and diodes for $400.

Probeing arround with a meter I see that the primary side of the PCB
has 3 big caps that read 0 ohms accros them. The secondary side has
the same set of caps and they read normal. It could be a coil in there.
If I was brave enough I'd just start desoldering everything and measure
them out of curcuit.

Andrew[/quote]

[circuit]

Does ["Andrew99"] or anyone have [size=18]AWZ6405[/size] POWER SUPPLY Chematic, pdf.file? Used at Pioneer PDP502MX/PDP505HD monitor. I assume that it is the same PWR as 50"Selti monitor, that I have.
[/quote]