View previous topic :: View next topic |
Author |
Message |
DT Guest
|
Posted: Wed Apr 25, 2007 6:15 am Post subject: Daewoo DMQ-2975,picture problem |
|
|
Daewoo Tv ,Model - DMQ-2975, is having a picture problem that the sound is normal, but the picture is narrowed horizontally (by the right & left side it is narrow & it's sides are curved). I have checked some capacitors arround the HOT but they r ok. So would you please help me with what to do or check or change ?
DT |
|
Back to top |
|
 |
cory Guest
|
Posted: Wed Apr 25, 2007 12:09 pm Post subject: |
|
|
check pin cushion transistor.probably shorted. |
|
Back to top |
|
 |
Guest
|
Posted: Thu Apr 26, 2007 8:31 pm Post subject: |
|
|
where can i find the pin cushion transistor & can u plz tell me what & where the pin cushion circiut is ?
DT |
|
Back to top |
|
 |
minnie
Joined: 18 Aug 2005 Posts: 2880 Location: Hell
|
Posted: Thu Apr 26, 2007 11:06 pm Post subject: |
|
|
Replace the vertical ic and caps around it. |
|
Back to top |
|
 |
CORY Guest
|
Posted: Fri Apr 27, 2007 2:03 am Post subject: |
|
|
not exactly sure on this model but it will be near horizontal output transistor but smaller in size and will be on a heat sinc.three pin transistor. |
|
Back to top |
|
 |
Guest
|
Posted: Fri May 04, 2007 10:58 pm Post subject: |
|
|
can the transitor (the samall one) make a fault like that ?? & can the vertical IC & caps around it can make a falut like that ?? plz help me.
DT |
|
Back to top |
|
 |
Guest
|
Posted: Wed May 09, 2007 5:35 am Post subject: |
|
|
can the transitor near the horizontal transistor (the samall one) can make a fault like that ?? & can the vertical IC & caps around it can make a falut like that ?? plz help me.
DT |
|
Back to top |
|
 |
Guest
|
Posted: Sun May 13, 2007 5:43 pm Post subject: |
|
|
can the transitor near the horizontal transistor (the samall one) can make a fault like that ?? & can the vertical IC & caps around it can make a falut like that ?? plz help me.
DT |
|
Back to top |
|
 |
nhoy
Joined: 09 May 2007 Posts: 7 Location: philippines
|
Posted: Mon May 28, 2007 11:01 am Post subject: |
|
|
try to check caps..the value is usually 100uF/250v...if everythings ok..change flyback _________________ joheuf |
|
Back to top |
|
 |
|
|